THIS MACHINIST LEVEL IS USED BUT IN GOOD CONDITION.THIS LEVEL WAS MADE IN USA IN NEW BRITAIN CONN. THERE ARE A FEW SURFACE RUST SPOTS ON IT.IT NEEDS A GOOD CLEANING AND THERE IS NO NICKS ON IT.

 

Vintage Millers Falls 3" Belt Sander Model 830 6amp- this is in very good working condition left under a awning & sanding belt corroded but machine is still in great working condition looks like i

 

Antique Blacksmith Anvil

 

Alansgrammie Store 2 VINTAGE BLACKSMITH CROSS PEEN HAMMER TOOLS

 

The item offered here is the micrometer holder. But, the micrometer shown, ground off on the back side of the frame, comes with it. The holder is cast iron with a 5/16in slot. The base is 2-3/4in diam

 

This Used Saw is in Great Condition for its Age The Wood doesn't have any cracks or splits The only parts missing are the 2 small pins that hold the Blade in place and 1 wing nut Approx Measurements;

 

****NO RESERVE***THREE DAY AUCTION*** WHAT A BEAUTY measuring approximately 24" X 2" X 1", this Model 11 Stratton Brothers level is about as good as you can find them. Both glass tubes are full and th

 

Sears Craftsman Combination Wrench Set. 11 wrenches size 7/8" thru 5/16" by 1/16 ths with the 11/32" wrench added to the set. Notes: The 13/16" wrench is a Craftsman "BF" series replacement wrench and

 

This is a lot of 12 ACE Lock keys they are all different juke boxes, gumball candy peanut machines No returns Shipping to continental US only unles additonal shipping is added

 

You are looking at five Blacksmith Hand Forged Set of Ram's Head Gun Rack Hooks or Utility Hooks. These hooks are made from 3/4" wide steel. The hooks have a opening of 1 1/2" to 1 7/8" and 4" to 4 3/