Your bidding on an antique oak machinist tool chest. Has 11 drawers,nichel plated corners and five latches. No brand name,the latches are Eagle Lock Co. and the lock is Yale. Measures 20" tall X 9 1/2

 

Up for auction: is this old miniature anvil, the anvil messures: 5" long, x 2 1/2" tall, x 1 3/4" wide at the base, with a work surface 1" wide. the hammer is cast iron and is 4 1/4" long. pliers are

 

This one is a large one. 24 1/2" long and heavy. Excess shipping refunded but if you wait until I can send invoice I will give you exact shipping. West coast is expensive but it drops the closer it ge

 

BIDDING ON A OLD No. 231 WRENCH 6.25" LONG NO PREVIOUS OWNER INITIALS OLD PLOW, FARM, TRACTOR MULTI-WRENCH WITH 4 SIZES, 3 FOR 4-POINT OR SQUARE NUTS AND 1 FOR 6 POINT

 

For auction is a vintage Stanley Zig Zag folding ruler, It is a heavy duty big 6ft measuring stick in 12 sections. Posted with eBay Mobile

 

This is an index plate #36 for a Unimat SL Miniature Lathe. It is part #1263/36. It is new in its original bag. Buyer pays $3.00 for shipping and handling. Thanks for looking.

 

budgie2cheap Store An old 10 tpi saw by Disston,Philadelphia.good teeth,quite sharp,would benefit from a final honing.all nuts present,some splashes of paint on handle,but solid with no breaks.straigh

 

Old wrench. The short leg is about 6.5 inches and the longer one is about 14 inches. The socket end is 3/4 inch and the open end is 1 & 3/4 inch. There are traces of green paint. Raised letters on

 

RARE KRAEUTER PHOTO ENGRAVERS PLIERS MADE FROM BRASS OR BRONZE THANKS

 

2 1/2" x 14"