Very Rare Clayton & Lambert No. 8 Blowtorch, unmarked!! – This self-acting blowtorch was manufactured by the Clayton & Lambert Mfg. Co. of Detroit, Michigan, and dates from July, 1900. To op

 

Vintage Huot Drill Index with Lot of 17 BitsManufacturer: HuotCondition: UsedUp for bid is a vintage Huot drill index with 17 bits. Most of the bits are used, but are in decent shape. The condition of

 

You are bidding on a unknown make vintage 2 man crosscut saw. Measure approx. 66 inches long, 6 inches widest and 3 1/4 inches at the narrow end. No broken teeth. Blade solid. Blade had light coat of

 

UP FOR AUCTION IS THIS NICE VINTAGE DOUBLE BIT AXE HEAD. QUALITY STEEL ESTATE SALE FINDING. 4-5/8'' LENGTH OF CUT 10-1/4'' LENGTH OF HEAD WEIGHTS 3 LB 3 OZ 3'' EYE. I havemade an honest and fair evalu

 

SMALL BENCH VICE FOR JEWELLERS OR SILVERSMITHS ETC MADE WITH HAND RIVETS MEASURES 9 CM LONG. THE JAWS ARE 27mm LONG & 8 mm DEEP THE VICE CLAMPS NICELY BUT THE BENCH ATTACHMENT SCREW IS WORN SO IT

 

YOU ARE BIDDING ON 2 ORIGINAL EAGLE STEAMER TRUNK LOCKSGET A SPARE NOW BEFORE IT'S TO LATE NOS BEING OLD MAY HAVE SOME RUST ALL PAYMENTS MUST BE RECEIVED WITHIN 7 DAYS NO PERSONAL OR BUSINESS CHECKS

 

This is a vintage wood pulley with metal frame There is a star on both sides of the pulley Notice the wood has damage on one end, but it is not brittle, so the rest is okay Item measures 11 ½ inches

 

Vtg, ATHA ..stamped..1.. .cutting surface is 2" wide .hardy is 6" long... post is 2-1/2" long and 1" wide, tool is in good shape...see all the pics as they are part of this times description...tool is

 

UP FOR SALE IS THIS VINTAGE BEST PADLOCK WITH LONG BRASS SHANK AND 2 KEYS. OLD BUT FULLY OPERATIONAL. MEASURES 3.25" TALL LOCKED AND 1.5" WIDE. MARKED BEST ON BOTH SIDES BOTTOM MARKED BEST WITH THE NU

 

Lot of two wrenches:15" indestro super 358010" No. 10 Offset Lawson Pipe Tool USHCo