I sell many of these old printer's type cases or drawers but this is a very unusual one. It is a unique size. It was not cut down it just came that way. The back is wood & is quite old. The case m

 

Nice old store scale tray only. Brass and I would say it was hardly used. Clean, other than needing a wipe down. Couple of small green spots. Not all dented up.. This is about 20" long, 11 3/4" across

 

For your consideration is a nice vintage egg scale from the OAKES MFG. CO. embossed on the front.It has a little piece of rust on the front as you can see from the picture,but other wise a nice piece.

 

Antique Vintage Printing Press Type Set Parts Can Container & Blatchford Base Catches Ther are 5 or 6 tools and many catches. 4-3/4" x about 2" across middle. Live Support. Call the us and talk to

 

Red Portable Typewriter & Case Olivetti Valentine, Designed by Ettore Sottsass and Perry A. King in 1969. Produced by Olivetti in Spain. This typewriter is a real POP ART design icon. In very good

 

UP FOR AUCTION IS AN ATIQUE SPOOL, SEWING CABINET. VERY UNIQUE. MEASURES 31 INCHES TALL, 17 INCHES WIDE WHEN CLOSED, AND 34.5 INCHES WIDE WHEN OPEN. PAYMENT: I ACCEPT PAYMENT THROUGH PAYPAL. WITHIN 3

 

ALL APPEARS TO BE WORKING CORRECTLY. A COUPLE OF THE KEYS ON LEFT SIDE WILL STICK. NOT CLEANED INSIDE PIECE. SURE COULD USE JUST A BIT OF TLC. SERIAL NUMBER 183916, I BELIEVE DATES THIS TO 1926. EXCEL

 

You are looking at 4 cast iron wheels they are 2 pair 1 wheel has 3 cut lines in it as seen in pictures .1 has the pin broken in it and the pin is stuck in it.They have some rust . Email us with any q

 

This set of 19th century troy ounce weights were from the estate of a miner who prospected here in Arizona (territory at that time) in the late 19th and early 20th century. They were found years ago i

 

Antique hat brim form Stamped with a 38 6 3/4 and 2 3/4 . Hard to read but also stamped Hatters supply house. It does have cracking and a place on the bottom where the wood chipped. It is still a very