A big brass grandfather dial, probably German. 14" square with raised numbers that screw on from the back. One screw is missing on the #3. Some light scratchs / scuffs that should polish out easily. I

 

For sale is a NEW Quartex Quartz Pendulum Movement with Washers and Nuts for New or Repair. Shaft diameter is 5/16" THREADED Shaft length is 15/16", TOTAL shaft length is 1 1/4". Width 2.25" Heigth 3.

 

Found this movement in a broken up cuckoo case i was attempting to build. Strike was functioning but not correctly. Found that second gear off strike fan was missing about 3 teeth. I did actually have

 

This is a working clock There is copper showing from underneath the gold color which may or may not be original. The glass is still intact and wind it up and away it ticks. Will be happy to answer any

 

.LodestarExpress Since Year 2000 DetailsCornwall Regulator Pendulum Battery-Op Wall Clock Condition Used, shows wear, does not work Measurements in inches 29 high x 15 across Shipping Buyer Pays Shipp

 

there is an S stamped on back of frame. i dont know much about this piece but thought it would be a nice addition to the right collection.thank you for looking be sure to check out my other listings

 

Vintage Ornate Filigree Kundo Kieninger Obergfell Anniversary 400Day Original Clock Glass DomeRemarkble handcrafted gold tone ornate filigree at face and columns Marked at the back KUNDO KIENINGER OBE

 

Store HomeAbout usDeliveryPaymentsReturnsContact us Welcome to Our Ebay Store!24/7 Global Support Vintage Retro Collectables Home Décor Glassware Art/CraftBooks and MagazinesChildren/Baby Clothing/Ac

 

Grandfather clock dial for Herschede hall clocks, with van sciver on the face plate just above the six position. in good condition, missing the moon dial lever only. The moon dial is painted and in go

 

This clock is marked "Manufactured by Waterbury Clock Co. U.S.A. on the front. The bezel is missing and there is no pendulum. There is no back either. It appears that one of the movement springs is br