LOT OF 16: VTG #A 1968 METAL ORNATE CABINET DRAW PULL HANDLES 16 VINTAGE METAL (brass color) #A 1968 CABINET DRAWER HANDLES PULLS APPROX MEASUREMENTS: 3 7/8” LENGTH; 1 1/4” HEIGHT;

 

This Ebay Auction is for a Vintage/Antique Heat Register/Vent. Simple Square pattern. Made of Steel, this fits a 8" X 12" opening. Over all size is 13 7/8" X 9 3/4"". Black in color, . This is in "As

 

VINTAGE UNUSED LOT OF 12 DRAWER PULLS. THESE CAME FROM AN OLD FUNITURE STORE DOWNTOWN CHARLESTON SC. STORED TOGETHER. SHOW SOME AGE/ WEAR/ RUST. STILL USABLE. I DID NOT POLISH OR CLEAN. MAGNET STICKS

 

UP FOR AUCTION I HAVE 10 MILK GLASS DRAWER PULL KNOBS.1 3/4 LONG , 1 3/4 ACROSS TOP, AND 1" AT BASE. ONLY 3 HAVE SCREWS.. IN AS FOUND CONDITION. I AM NOT AN EXPERT SO ASK QUESTIONS. I LEAVE FEED BACK

 

3 OLD STEEL GARDEN HAND TOOLS CULTIVATOR/FORK and DISSTON GRASS CUTTER. All 3 tools are in good used condition as shown. Cultivator is marked -JAPAN, grass cutter is marked - DISSTON, U.S.A. and the f

 

Cast iron roof finial Centre stem with four side scrolls and tulip shaped top capCast Mark no7 Very course screw thread for fixing into timberHeight 48cmWidth 26cmSpike 20cm

 

Listed are four antique Victorian wood plinth/ bulls eye rosette blocks, that I removed from a house in Upstate New York. All four are matching in dimensions, 4 3/4" wide, 4 3/4 " tall , 1 " thick. Th

 

These rustic old antique style set of shelf brackets are made of cast iron and measure 8 3/4" x 7". These brackets are great for decorating any square/cased opening or can be used as shelf brackets an

 

For your consideration is this Antique/Vintage Porcelain Electric heater. Was told it's from the 1920's. The front is cast iron with a porcelain coating. The grid in the front of the heating element i

 

Knocker only, previously attached to old door. you can pick up screws that will work best for you . Stamped Hong Kong very small on bottom. Posted with eBay Mobile