Rare Vintage Small Hand Axe Ax with Crown Logo vgc Old Tool Click Images to Enlarge You are bidding on a vintage and rare Small Hand Axe Tool with Crown Logo in good clean, as shown condition. This ca

 

This is a fantastic find!! Vintage early century felling axe 34" long from base to eye. The head itself is 7.5" long x 4.5" wide at the cutting edge. 4 lbs total weight. I have restored the finish on

 

493K1737 OLD Japanese Hira-ganna Wood block flat plane 66mm Hidetaka DIMENSIONS Overall size 207 x 80 x 31(mm) Blade width 66 (mm) = 2-5/8" Weight 901 g *********************** This Hira-ganna Wood bl

 

Japanese vintage axe head 2. The brand is unable to read. The blade is made from high carbon steel and laminated. The blade has been sharpened with #800 water stone. There is a hairline crack. The cut

 

2 Unusual Blacksmith Hammers. The one has rounding --1"--heads and a -4 3/4"- Head. The other has a --5"--Head -and --1"--Chisel ends--one vertical and one horizontal. Both handles approx.--13". Hamme

 

The Roper Whitney punch and die set came out of an estate sale from a person that had a small tin or metal work shop. Threads are in very good condition without any large nicks on them but you may see

 

HERE IS ONE OF THOSE LITES THAT MAKE PEOPLE SAY "WOW-LOOK AT THAT ONE!!" THIS ONE MADE BY THE BLAKE MANUFACTURING CO. IN THE THIRTIES. WORKS FINE WITH 2 "D" CELLS. HAS A DING AS SEEN IN PIC# 5 AND A F

 

All are very nice the miller falls no 8 the blade as no name the DUNLAP needs to be clean or just use the parts for the no8 miller fall other twi or very nice as some wear so look at pic thanks

 

Unusual Stanley markings, 5 1/2 on frog bottom, O on blade and USMC on chip breaker. Only apology a chip off the side of the heal, as shown in both pictures. The Tote hold down screw is brass too, I h

 

8 inch folding handle draw knife stamped - L.JENNINGS PATENTED FEBRUARY 20 1906. Also has Jennings logo - arrow with J inside. Used tool but still very usable - good condition. Posted with eBay Mobile