This bid is for a clean logging/logger swamper/faller axe head clearly marked True Temper, Vulcan, Kelley Works. Head weighs 4 1/4+ lbs, measures 10 3/4" with a 4 1/2" edge. Good clean usable used con

 

6" long; 2.5" opening. Old farm item showing the years of use & wear. Some red paint still on it. #480 on it - Still threads together. Horse drawn? or very old tractor item? weighs 1 pound 2 oz

 

Smiths Washita Tool Sharpening Stone Hone Used condition but with lots of life left in this one.Cedar box is 8 9/16" long X 2 13/16" wide.The stone is 7 15/16" long X 2" Wide X 1" Thick.Comes with Kni

 

8 vintage S-K 1/4" drive deep well SAE sockets, Made in USA sockets are approx. 2" long,9/16" 41918, 1/2" 41916, 7/16" 41914 3/8" 4191211/32" 41911 5/16" 41910 9/32" 41909 1/4" 41908 In good working c

 

Both tools are clean, sharp and with no pitting or corrosion. They are tang style and come without handle. Both have the Buck Brths. logo with the stag. Very high quality. 1) 1&1/4" gouge, 11" lon

 

GOATFREAK64 Store VINTAGE JET TWISTER M-84 WIRE TWISTING TOOL IRON WORK, FENCING, ETC.

 

This is a vintage Stanley Scraper No 80M never used in original box. Made in the USA. The bottom of the plane has slight surface pitting from storage which should clean up with some fine emory cloth.

 

6 x Hachetts as described below and in photos: 1. ELWELL 1&3/4 - needs wedge. 2. HYTEST CHALLENGE - Head slightly loose. 3. FERN - Good handle & solid. 4. RED BEACON 464 - Good larger handle &

 

you will be bidding on a vintage set no.5 drill bit holder made by THE STANDARD TOOL CO. of cleveland ,ohio,made of cast,has 29 holes,1/16 to 1/2",in good condition for its age,does have some age crac

 

measures 8" long x 2 1/2" wide........the cutting iron, and cap iron, measures 1 7/8" wide and have no rust or pitting...!!!........marked with the Moulson Bros logo.......has a thin piece of wood, pe