CHISELS! GOUGES! Get your chisels here! Ok seriously, you are bidding on all chisels/gouges pictured. First, there are 8 Craftsman wood turning tools for your lathe work. I am confident they have neve

 

THIS IS A STANLEY NUMBER 3 WITH CORRAGATED BOTTOM (3--C). THE PLANE IS ALMOST UNUSED; IT COMES WITH THE BOX, WHICH IS VERY POOR. THERE ARE SPECKS OF PAINT ON HANDLES AND SIDES. 95% PLUS ORIGINAL JAPAN

 

Template CDGPNK2 Description used.Blacksmith name. ---銘秀（akihide）Width of the blade : about 24 ㎜.155g.It is a laminate blade. It has rust. because old it has a dirt.Please sharpen before use

 

Up for Auction is Vintage Ford 9 inch Mechanics Wrench circa. 1920s - 1940s. This wrench has been used and still has good knurl and gear threads. There is some wear to the moveable lower jaw. The jaws

 

OLD WOOD CARVING TOOLS STANLEY 1¼" BEVEL EDGE CHISEL TOOL IS IN FAIR FUNCTIONAL CONDITION COSMETICALLY CHALLENGED DUE TO WEAR VISIBLE IN HANDLE = LARGE CHIP AND SPLITS GRADE AND CONDITION IS OTHERWIS

 

Wedge shape and flat chamfers suggest a date of around 1800, give or take 10 years. There is the name stamp I Harrison in capital ZB. Could this be Jonathon Harrison of Newcastle Upon Tyne? Good condi

 

Vintage No 34 - 1/4" wide shallow sweep, flared back bent carving gouge. Rust free blade with some light pitting, brass ferrule and sound hardwood handle free from cracks and damage. Marked “34.”

 

I am original owner, and purchased these in the early 1980s. The following items are included: Socket Size Part No. 3/4 32-1224 11/16 32-1222 5/8 32-1220 9/16 32-1218 1/2 32-1216 7/16 32-1214

 

This vintage hammer measures approx. 12 1/2" long - has brown handle - bottom is marked TT - the head is stamped TRUE TEMPER ROCKET PAT. PEND. A13 - I see no dents on the handle & no chips on the

 

Set of 3 Robert Sorby Registered Mortice Chisels - 1/2 in, 3/4 in, and 1 in. All show some wear from normal use by a (now retired) woodworker.