This is a vintage Model A2 Time Main Spring for Big Ben alarm clocks (except chime models).The spring appears new in the original packet, it may show signs of age. The packet reads: Model A2 Time Main

 

                     This is an EXTREMELY BEAUTIFUL VERY LARGE example of a Seth Thomas WESTMINSTER CHIME FLOATING ESCAPEMENT Mantle Clock in wonderful CONDITION!        This

 

This is a set of 3 weights from a vintage cuckoo clock. One is smaller (5 inches) than the other 2 (6 inches). They are shaped like pine cones and have a loop at the top to attach to the chain. I don'

 

This is only the movement, dial, hands, etc as shown – there is no case. The clock is running but runs fast. Slumber Stopper was a name used by New Haven Clock Company – the name New Haven does no

 

This clock is pretty old and I believe it is from the mid 1930's. It does plug in & power up. I see that the second hand moves just fine, but the clock hands do not work as they just flop around.

 

Coo Coo Clock Made in West Germany Clock looks good, but not working, has been made into a wall decor so sold as is because of the alterations that have been done. Check out pictures and ask questions

 

Vintage Chalet Swiss Weatherforecaster / Temperature Gauge Hygrometer 7 5/8" x 5 1/2" x 3 1/2" Switzerland.....Marked Made in Switzerland on the bottom.......Chalet has Balcony, Flowers, Windows, and

 

THIS IS A CLOCK MOVEMENT IT IS STAMPED PERIVALE A NUMBER STAMPED IS 279287 PARTS ONLY I WILL TRY TO ANSWER ANY QUESTIONS

 

This bezel is about 4 & 11/16 inches in diameter. It does not respond to a magnet so I believe it to be brass. The glass is beveled. It is stamped on the edge 5552 L C. There is some corrosion alo

 

You are bidding on an antique wall clock. It measures 26" long and 13 1/2" wide. It has two holes where you wind it up for keeping time and the ringer that rings on the hour and half hour. Both need a