This is for this pick and it has a chip on the end tip on one side as you can see.Size of this is approx. 18.2 cm L x 6.2 cm H x 3 cm thickest part.Please check pictures carefully as they make up a la

 

Here is a nice double bit axe head I bought it at an auction and just cleaned the rust off needs to be sharpened Posted with eBay Mobile Posted with eBay Mobile

 

Vintage Wood turning tool Shipping and handling $6.50 Posted with eBay Mobile

 

Antique radiator cap! Old ford. Good condition overall. ORIGINAL!

 

This adz is in very good used condition.No damage or repairs.The head is 9 3/4 inches long,with a 5 inch cutting edge.( very sharp ).It has a 28 1/2 inch hardwood handle.The head is stamped B&M R.

 

.Here are two vintage leather creasing tools, solid and ready for making some shoes! Please check the pictures , ask questions ,and don't forget to look at the shipping calculator BEFORE YOU BID. Ebay

 

Here is nice vintage Ames Cylinder Gauge with Ames Cylinder Gauge Points in the original dovetailed wooden box with original instruction book. Great old outfit!! DO NOT PAY VIA EBAYS INVOICE SYSTEM, T

 

Selling 1 Vintage Belknap Bluegrass Hardware BG47-13 Claw Hammer Octagonal Head. Claw Hammer Louisville, Kentucky 12 1/2" Long. *** Take a look at pictures and I will be happy to answer any questions.

 

GOOD+ BENCH JACK; QUALITY CENTERING TOOL WITH A COUPLE OF NO-HARM GRINDING MARKS,; STARRETT No 10 HOOKED RULE AND A No 270 WEDGE SHAPED RULE EACH HAVE SOME ROUGHNESS THAT MAY PARTLY POLISH OUT; BALL A

 

7 Brass Mortise Cabinet Locks w/Keys & Screws Corbin & Eagle Lock Co 2 Eagle Lock Co – 1 ¾” x 2 ¼” x 9/16”, shaft 5/16” tall x 5/8” diameter 4 Corbin Locks – 1 5/8” x 2” x