Template ICNPNK2 01 KIWA - KANNA. VTG. Japanese WOOD BLOCK PLANE carpenter's tools NR Description Please see a picture.  This plane is a tool which can perform fine work. Fixed width can be adjusted.

 

A SET OF 4 KAWASAKI WRENCHES WHICH INCLUDES I- 27 MM BOX WRENCH 1- 6 X 10 MM WHEEL SPOKE WRENCH 1 -12 X 13 OPEN END WRENCH AND I -14 X 17 OPEN END WRENCH FREE SHIPPINGOn Dec-02-14 at 05:56:06 PST, sel

 

VINTAGE STANLEY NO. 743 “VICTOR” BENCH VISE with jaws 2” wide. Frame is 6 ½” high. STANLEY in large letters is cast on both sides. It clamps to a bench. STANLEY Sweetheart trademark and U.S.

 

Miniature Cast Iron Advertising Anvil Marked Ductile Iron Society on one side with date.Foundry Service Co and the number 6 on other side.See Photos above. Size: 3 1/2" x 1". Height 1 3/4".

 

17, 18, and 20 mm proto anti slip design wrenches. the longest wrench is about 11 1/2" long. US ship only. i combine shipping.

 

As found pcs. Stanley No. 65 Wood Plane.. Will let buyer clean to their satisfaction. Please judge condition for yourself with pictures provided. Thank-you!!! Approx - 7" x 2" x 2"... Marked No. 65 on

 

Template ICNPNK2 OLD Japanese WOOD BLOCK PLANE " Kiwa Kanna "  iron from carpenter Tools NR NR Description good condotion I think that it was made about 30years ago.  Since it is old, there is rust.

 

Good + Condition. The thoughtful restorer could do a lot worse than this. Surface rust. Almost all parts except bulbous hand part that retains blade, and, the blade itself. All the parts except the kn

 

Vintage Stanley 750 socket chisel in excellent condition. Plenty of iron length and the edge is sharp without pitting or chipping.

 

A beautiful, light joiner, Stanley/Bailey 6 plane, with finish baked on and heavy casting base. The base is rust and pit free and has been milled .005 flat on the bottom and sides. There are three pat