This Stanley Sawset 42W is used showing some wear but in good condition. Please see the pictures. I took a lot so you could see everything. It has a blue finish, a little rust (see pictures).

 

Antique Starrett No.6 Screw Pitch Gage Pat. MAY 19, 1885 Starrett No.6 Screw Pitch Gage, American and US Standard 60 degree Threads - 30 Pitches, Range 4 to 42 Threads Per Inch , Also 11 1/2 and 27 Pi

 

Description Here is a nice 19th century screwdriver in good original condition with a shaped handle. The steel surface has a nice patina from age with the makers name Sheffield and the shaped wooden h

 

You are bidding on 2 sliding breaker bar ratchets. Both in good working condition. The chrome is chipped off slightly on the 1/4" drive, but the 3/8" drive does not have any chips. There is an engravi

 

Nice old vintage tool everything there

 

Heavy duty hook measuring 3 3/4"long & 3 3/8" across. The screw measures about 1 1/8". This hook has two prongs with a detailed design in the metal. Magnet sticks to this hook.

 

Very good condition, gently aged, works perfectly 11” H 14” L. Please feel free to ask questions or request more photos. Thanks for looking! Normal 0 false false false EN-US X-NONE X-NONE

 

ANTIQUE OR VINTAGE WOOD PLANE, BEAUTIFUL COLOR. MARKED JE AND ALSO MARKED OHIO. ABOUT 12" OVERALL LENGTH. PLEASE LOOK AT ALL THE PICTURE BEFORE BIDDING AS THEY TELL THE STORY. SOLD AS IS NO RETURNS.

 

(5) TOTAL (1), 72 IN. with #1-432834 + #1-829975 STAMPED IN. (1) 24 IN., WITH SHELLAC AND A FAULTY HINGE AS SHOWN (1), 24 IN. WITH A MISSING PIN AND SMALL CHIP OF WOOD, AS SHOWN (1) 24 IN. THAT SEEMS

 

VTG HAND TURNED CARVED WOOD MALLET HAMMER 1 PIECE TOOL 8 1/4 " Tall ~~ In great VTG Condition ~ Has the Initials H H N on bottom Measures ~ 8 1/4 Long X 3 " wide Handle ~ 4 " long please ask all qusti