This is a LOT OF 6 VARIOUS 12BH7A VACUUM TUBES. These tubes were pulled from working equipment, there is 1 Black plate in this lot the rest are Gray plates. All tested like new at 100/100% or better.

 

TEN DAY AUCTION(get your bids in early... don't miss out!) DESCRIPTION: Vintage serviceman tool box loaded with radio tubes and miscellaneous. Front panel reads: WE RECOMMENDTUNG-SOLELECTRON TUBESFOR

 

JIMJAMS VINTAGE MUSIC Brings you 2 vintage Genalex KT66 audio output tubes. Tubes are as pictured, there is alittle residue around the base of the tubes. Tubes are described below. Tubes were tested o

 

01 1Set Lead Benders 4pcs Lead benders Forming ToolingFor 1/4 watt 1/2W 1W 2W 3W watt resistors. Fit for Allen Bradley resistors, Diode, capacitors and Others . Dont stress the leads at the component

 

This was a device that I bought and built during the 60s -- you can broadcast your own radio show to an AM radio within your block! I had a lot of fun with this, later on I became a REAL DJ on the rad

 

goodwillcentraltexas store Description Onkyo AV Receiver TX-DS575X Digital DTS Surround Re-EQ Condition Receiver is in good cosmetic shape some minor scuffs, scratches, dings and dents. Item is a litt

 

This auction is for a UTC model A-20 transformer. This transformer has strapping options to operate at 50, 125/150, 200/250, 333, or 500/600 ohm impedances. It is used and slightly damaged as shown in

 

Vintage Concept 11.0 Stereo Receiver. These receivers have a loyal following. Rated at 100 watts @ 8Ohms and 175 watts @ 4Ohms. Fascia is very clean. Cabinet is very nice with the exception of the sma

 

2 NOS 6SL7GT RCA Tubes Be sure to check my other auctions for more great tube amp and audio gear. All auctions start at $0.99 and are No Reserve ! I had planned on building my own custom Tube Amplifie

 

I think I got these out of TVs though I might be wrong. I have a third like this with a transformer mounted to it. Wires were cut off the terminals and will have to be desoldered.