A small, vintage, pocket Spirit Level, of round cross section with a flat bottom. It is clearly marked “Wm Marples & Sons Ltd, Sheffield, England”. It is fitted with a greeny yellow fluid / gl

 

This set is sized as follows: (width x steel length x overall length) 1-1/2" x 7" and 13-1/4" overall, 1-1/4" x 7-7/8" and 13-3/4" overall, 5/8" x 6" and 11-5/8" overall, 1/2" x 6-3/8" and 11-5/8" ove

 

I am selling a used original Plomb 5449 1/2'' ratchet. It is in good working order. Pebble finish. Selector will go too far to either side but if kept in normal operating areas works fine. It is a 60

 

babeann Store 3 GROUP 1 OLD / VINTAGE WRENCHES 1 IS FROM LAMBOND DESIGN CLEVELAND,O.U.S.A. IT IS 8 1/4 IN. LONG MIDDLE ONE HAS ON IT 11 AUTO ON THE OTHER SIDE IS 6 OR 9 IT IS 11 IN. LONG LAST ONE IS 1

 

This is a vintage Plumb 3 2 double bit axe head that is free of wood and in excellent condition with excellent markings also marked FS for forest service The head is 9 7/8" end to end and 4 1/2" acros

 

Vintage Winchester model 2118 Pliers/cutters in excellent working condition some patina but they work great... Ships worldwide thanks for looking!

 

Smaller antique English molding plane with a convex blade to produce a concave profile of about 1/4 inch width. There appears to be a maker's mark but I cannot make it out but may be "_rowell (perhaps

 

THIS IS AN OLD PAIR OF "LADY LEGS" WOODWORKING DIVIDERS. THE ITEM MEASURES ABOUT 5 1/4 INCHES LONG. THEY MOVE APART, SO YOU COULD STILL USE THEM. THERE IS A STAMPED MARK: "F.B. CASE". THEY ARE HARD TO

 

26 Assorted Wood Carving Chisels and Gouges from an estate sale. There is a set of 10 Tombo-Trademark-Japan, a Buck Bros. Gouge, a large Whitherby Gouge 1" wide, 2 Millers Falls Gouges, 2 Stanley chis

 

This hardback vintage 1959 industrial supply catalog B from the E.C. Blackstone Company located in Memphis Tennessee. This large catalog measures 11 inches tall, 7 3/4 inches wide and 1 1/4 inches thi