Really nice Swett Number cast iron pot with little surface rust. It is 5 inches in diameter and 4" deep. NICE!

 

Description I think this was made about 30 years ago. It is rusty. The weight : about 60g The width of the blade : about 9 mm Trademark registration name or blacksmith name : "信幸" NOBU- SACHI I

 

Antique model STEEL Watch Case Holder VICE ~ Nature Metal Finishing, 4 Brass Pins ( Adjustable ) ~ Size approx. 58 x 70 x 34 mm H ~ Max for approx. Dia 52 mm Caseback ~ Good for Collectors ~ Send by H

 

2 Antique Small Hand Forged Blacksmith Tongs - No Reserve. They measure about 10 1/2 inches long. They are in very good condition. The jaws open and close freely.

 

VERY NICE 2 Lb Combo Peen Hammer... Here is a rare hard to find combination peen, you get a cross peen and a straight peen with just the flip of the wrist, no need to fumble around with 2 hammers duri

 

i000000 Vintage 6" Mahogany & Brass Spirit Level Hockley Abbey vgc Old Tool Click Images to Enlarge You are bidding on a vintage 6" Mahogany & Brass Spirit Level by Hockley Abbey in good condi

 

2 old leather cutting tools makers name on both is Karl Leister one is older than the other. the brass ferrule on one of them is a bit crushed inward. see pictured.

 

PLUMB BOB by GENERAL HARDWARE #800-8. It's an 8 ounce. In very good condition. No sign of use that I can find, just normal aging. Complete with original tube which also in very good shape.

 

IMANNIEMAE Store Antique BRASS Wilson Bohannan PADLOCK Lone Star Gas Company Wilson Bohannan brand, brass key padlock was designed for and embossed with the Lone Star Gas Company of Texas. Rare find f

 

VINTAGE Bevel back socket slick 2”W 9"L CHISEL oal 12 3/4 FROM THE CUTTING EDGE TO THE END OF THE SOCKET IS 12 3/4" AND THE CUTTING EDGE IS 2" WIDE AND ABOUT 9" LONG. AS SHOWN THE HANDLE HAS A SMALL