Tibet Old style Bronze Carved Big fengshui buddha & Ganesha lock /keys Use Description Material: BronzeSize: Height: 7 . Long: 7 . breadth: 2 (cm). Payment We only accept PayPal payment Delivery d

 

I am listing this vintage brass head hammer that is 11" long overall, the brass head being 2-3/4" x 3/4" and weighs 7.5 ounces. I cannot find any maker's marks on this piece. Please check photos and a

 

Vintage Bench Top Mount Vise. 7 " long , Jaws 2 1/2 " wide. Jaws open to a maximum of 2 1/2 ". Four screw holes will allow you to mount the vise anywhere on the work surface. Although this particular

 

Vintage heavy duty cutting pliers. Removable Cutting blades. adjustable opening for wire striping.Made in USA Todd's PAT    Brand 8 inches long. very good condition. N 04 stamped on pliers 

 

VINTAGE STANLEY TOOLS #7 WOOD PLANE This is a vintage wood # 7 plane made by Stanley. It measures approximately 21 1/2" long x 3" wide and has a wooden knob and handle, and a plastic screw that works

 

KD Tools - KD 2031 - Chain Pipe Cutter - This early model (without plastic coated handles) of the cutter made today both share the same model number KD 2031 - 3" pipe cutting ability - Often used exha

 

ACORN BRASS MANUF'G CO. CHICAGO "CHAMPION" ONE PINT BLOWTORCH VERY RARE SEE Vintage Blowtorches p11 (THIS IS THE ACTUAL TORCH PICTURED IN THE CLOSEUP OF THE PUMP KNOB IN BOOK)THIS MAKER IS VERY HARD T

 

PLEASE READ ENTIRE SECTION BELOW BEFORE BIDDING I bought a lot of tools at an auction that included many leather or shoemaker’s or harness maker’s tools. I know little about such tools and have tr

 

The item offered here is the micrometer holder. But, the micrometer shown, ground off on the back side of the frame, comes with it. The holder is cast iron with a 5/16in slot. The base is 2-3/4in diam

 

Smaller antique English molding plane with a convex blade to produce a concave profile of about 1/4 inch width. There appears to be a maker's mark but I cannot make it out but may be "_rowell (perhaps