Old draw knife,marked Snow & Neally Co. Bangor Maine,overall width 20",13 1/4" cutter. Clean,sharp,straight and tight handles. In very good condition. $2.00 handling charge. Please check my auctio

 

Offered here are two vintage Folger Adam jail / prison keys. They both measure approx. 1-1/4" across the bow and are approx. 3" long. On one side of each bow in raised letters is "FOLGER ADAM JOLIET,

 

A tiny, vintage, brass backed “Gents Saw” with a Boxwood handle. The brass spine is marked "Buck, “Tot Court Rd”. It only measures approx. 5 7/8” overall. There is some minor pitting / disco

 

MADE IN JAPAN.It was made with ebony Length:360mmThickness:28mmx 20mm Please let me know if there is any question. The shipping cost is $20.

 

Up for auction is this vintage metal Eagle tackle box. Great vintage condition.

 

HERE IS A GROUP OF 20 MIXED SKELETON AND BARREL KEYS.THE LONGEST ONE IS 3 1/2" AND IS MARKED R&E. THERE IS ONE 1 3/8" BRASS BARREL AND THE OTHERS ARE IRON. MOST ARE UNMARKED. ONE HAS SOME CORROSIO

 

vintage Stanley hatchet made in usa

 

THIS SMALL WOOD PLANE MEASURES 3 3/8" X 1 1/4". THE TOP OF THE BODY IS MARKED 101 WITH THE LETTER S ABOVE IT. THE BLADE IS MARKED STANLEY RULE AND LEVEL CO. THE BACK OF THE PART THAT HOLDS THE BLADE I

 

VINTAGE MACHINIST BOX IS IN GOOD SHAPE OVER ALL. HAS THE METAL CORNER PROTECTIVE HARDWARE, NICE DOVETAILED SIDES, THE DRAWERS ARE SOLID, THE BOX ITSELF IS NOT ALL BANGED UP. THE LEATHER HANDLE IS IN P

 

All four of the block planes are used. There is 1 Stanley #120, 2 Stanley 110, and one unknown. The unknown one is missing the front knob. It looks like a Stanley bit I can't tell. The all need to be