Lot of Vintage Socket Set, Screwdrivers, Drill Bits, Hammer Etc. A-1342Condition: In "Pre Owned" Condition, with some surface wear and/or corrosion as shown, includes mostly Foreign Makers' as shown,

 

STANLEY RULE & LEVEL CO. WOOD WORKING PLANE No. 35 AS FOUND BARN CONDITION! NEEDS CLEANING! 10In. Long I don't know anything about tools...PLEASE STUDY PHOTOS!! PLEASE SEE PHOTOS...PLEASE READ CON

 

Here is a vintage small hand tool stapler marked; DIAMOND #1, pat. Mar.13, 28. It is spring loaded and feels like it is working properly, except I have no staples, or whatever it uses, to test it! The

 

VINTAGE Bevel back socket slick 2”W 9"L CHISEL oal 12 3/4 FROM THE CUTTING EDGE TO THE END OF THE SOCKET IS 12 3/4" AND THE CUTTING EDGE IS 2" WIDE AND ABOUT 9" LONG. AS SHOWN THE HANDLE HAS A SMALL

 

oldtoolbarn Store Antique Cast Iron & Wood Hudson Barn Hay Trolley Pulley Old Vintage Farm Tool Up for bids is an antique pulley. This pulley measures approx 11" long from the top of the swivel ri

 

this jig has minor surface rust that can be cleaned off with light rubing with 440 grit paper then keeping them waxed. comes with the 5117 1/2 " Half-blind DovetailTemplate

 

Up for auction is a January 24, 1860 patented nut wrench by John E. Neil, U.S. Navy. As per patent information, “The adjustable jaw has a pivot pin between the adjusting nut and the jaw segment. The

 

ULMIA burnisher Nr. 732. Constructed of a heavy, dense, light colored wood. Comes with its box and instructions. The instructions are in German. The burnisher has inked stamp Made in Germany within a

 

LARGE ROSEWOOD SLICK CHISEL HANDLE OLD TOOLS FOR TIMBER FRAMING 17" long overall - unused old stock handle tapers down to 3/4" on the small end Check out my other items!

 

6 1/2" long . Blade 3 5/8" . Good condition . #2 C. Hammond Cast Steel . Minor rust .