VINTAGE MCCLINTOCK ELECTRIC ALARM CLOCK. MEASURES APPROX 6 3/8" TALL AND 6' WIDE AND 3' DEEP. WORKS FINE WHEN I PLUGGED IT IN. MARKED WITH D B MCCLINTOCK CO MPLS MNN USA NEEDS CLEANING PLEASE USE PICT

 

Fresh from a local estate and as found.I found a key that works and wound it and both springs are fine.When I wound it the balance wheel took off running.It runs a little slow.About 5 minutes every 24

 

Vintage Meiko Glass Dome Clock w/Wooden Base PARTS/REPAIR This is a vintage Meiko glass dome clock. Total height is approximately 7 1/2", including the glass dome and the wooden base. Base is approx.

 

Hermle 791-081 45 cm skeletonized clock movement with highly polished plates in running condition. This movement strikes the hour once on the bell mounted at the top. No discernible wear. No other par

 

This is nice Kundo clock made in Germany. It is key wound, but the key is missing. I was able to wind it with my Elgin key and it works just fine. The glass is etched on the sides and back panels, and

 

STORE: Please also check out my store for more rare clocks that i have to offer. IF YOU WANT TO GET WORLD'S BEST? YOU HAVE TO DO SOMETHING YOU HAVE NOT DONE BEFORE!!! ADD US TO YOUR FAVORITES BE THE F

 

PLEASE NOTE: No bidders from Italy. Your country does not allow clocks to be imported. Great clock. Runs, keeps good time, and has a dial for adjusting the speed on the face. It looked like a Gilbert

 

Hudson Clock Swiss made. Approximately 3" tall. Clock is functional. Sold as-is, as pictured. Please ask any questions, prior to bidding. Thank you.

 

Normal 0 false false false EN-US X-NONE X-NONE CONTACT ME THROUGH THE MESSAGE CENTER WITH ANY QUESTIONS PAYMENT IS BY PAYPAL ONLY Payment must be made within 3 days. 3 days of non-payment will result

 

X 4 Sauter Small clock Complete Balance Hair Spring Parts Please see pictures for further inspection Happy bidding!