This set of 2 wood carving chisels are in excellent condition. They are a no 5 gouge chisel and a flat spread end marked T. They are both marked Addis Cast Steel England as well. These are great tang

 

4 vintage Buck Brothers wood carving chisels in poor condition. The 2 smaller ones need sharpened and the 2 larger ones need new ends ground on them. The handles are good with some carved initials on

 

Vintage Hand Drills, 3 of them, along with Augers and Micro-Dial Expansive Bits, plus. These are from my Parents Estate Sale. Need to raise funds, many different items listed. Please see pics - Thanks

 

Used Vintage BINKS No 85 Air pressure adjustment guage. Tire paint tank regulator. Stamped : Binks No 85 200 binks MFG CO. 0 - 150. Lbs/in 2 Kg/cm 2. Untested sold as is for parts, Restoration, Refurb

 

This is an older, 6" Stanley 60 1/2 block plane.It is complete. The metal has been corroded in several areas due to use and weather, but does not affect the performance of this little plane.This old b

 

Up for auction is an antique moulding plane by Bodman and Hussey, of Pawtucket, R.I. . This plane is marked on one end with Bodman & Hussey, Pawtucket, R.I. . The other end is stamped, just the nu

 

Here is another Estate find, a nice peice, of Vintage Railroad track, to use as an anvil. or to make it look more like the big anvils. This has no markings on it, is a little rusty from being in a gar

 

includes nozzle tip for end of flexable nozzle all brass tank

 

Japanese plane Hira kanna "Seijyu" 70mm by Takeo Nakano This plane was made by Takeo Nakano. Takeo Nakano is one of the best blacksmith in Easy Japan It was made with old blue steel #1.The blade was m

 

Stanley#10 Carriage Maker's SW Plane Description:SW.CA. 1919-322'/8”w x 13” lPlane has no cracks or repairs that I can see. There are some deep scratches on rear of sole probably caused by a nail.