A pair of transformers with no name of manufacturer- Filament trans.--5.0 volt @3 amp. & 6.3 volt@ 3 amp.--Primary 115 volt- Does have a number 6002005-2- Power trans. 6.3 volt w/ct--also a 5.0 vo

 

,I WILL BE LISTING OVER THE NEXT FEW MONTHS..RADIOS, STEREOS, RECEIVERS,, AMPLIFIERS,,SPEAKERS OF EVERY SIZE, TURNTABLES ,REEL TO REELS, PHONE & RELATED ITEMS, CASSETTE PLAYERS & RECORDERS, 8

 

THE BIDDER MUST HAVE MINIMUM 50 EBAY POINTS. 3 x Tubes Valvo e283cc with Goldpins and very good Values ( look to the Picture ). I tested the Tubes on two Systems. The Tubes are used. I make combi ship

 

Up for auction is a vintage what I beleive to be is a tube amp. I think it is made by RCA or Altec but I am not sure because there is not a maker or model number on it. It has been tested to power on

 

15" Utah Speaker in 16 ohms This is a Utah 15 inch 16 Ohm Ceramic Speaker. This Speaker works, but needs to be reconed before using! The cone is ripped! No reserve! This is one of the best sounding sp

 

THIS IS A JVC JA-S71 80 WATT (IT SOFT CLIPS AT 105W) INTEGRATED AMPLIFIER MADE IN JAPAN AROUND 1976-78 BACK IN THE SILVER STEREO ERA. ITS HEAVY AT 35 POUNDS AND BUILT LIKE A TANK NOT LIKE THE NEWER JV

 

YOU ARE BIDDING ON A VERY NICE VINTAGE RECEIVER. GREAT TO LOOK AT AND AMAZING TO HEAR. THESE WERE MADE WHEN THE ACTUAL WATTAGE MEANT SOMETHING. SPECS: Tuning range: FM, MW, LWPower output: 16 watts pe

 

Here is a very nice HEATHKIT IT4 SIGNAL TRACER AND OSCILLATOR UNIT both are in working condition the switches need cleanin though a little scratchy, the tuning eye is bright and the test oscillator ha

 

Here's a very nice Western Electric 249-B tube from the collection of an engineer who worked for AT&T I the 40's & 50's. Please note, if you send me the settings for my Hickock 533 or Sylvania

 

THIS UNIT NEEDS A TYPE 5AR4 RECTIFIER TUBE OTHERWISE WILL WORK GOOD SOLD JUST AS PICTURED THIS UNIT IS FOR AUDIPHILE GRADE AUDIO. IT COMES WITH EVERYTHING YOU SEE. THE TUBES TESTED OK AND THE FRONT PL