Vintage E A Berg Socket Slick Chisel 3/8 In. 10 MM. Overall Length 5 5/8 In. Socket End Is In Nice Condition With Heavy Shoulder Stained No PittingQuality Swedish Steel With Shark LogoOverall A Nice V

 

Welcome to another DINOBOB auction! International buyers will pay a higher shipping fee. I ship worldwide...... Ask questions if concerned. YOU ARE BIDDING ON A...Vtg PLUMB 32 Double Bit CRUISER Logge

 

Payment by palpal only. We have here an Old "ALLEN" Compression Tester. The instructions are marked 1-42. And the newest vehicle on the Compression Test List is 1942. So it is probably safe to assume

 

i have a albrecht keyless chuck 1/32" to 1/2" or 1 to 13mm its a jacobs chuck arbor #2 morse taper with #6 jacobs taper made germany in good used condtion buyer pays shipping and handling thanks

 

2- Collins one 11 1/2 inch at 3.13 lbs and one at 10inchs 3.2 lbs 2- Plumb one 10 inch 3.8 lbs and one 8inch 2.7lbs 1- AX108 10inch 3.9 lbs 1- unknown primitive 81/2 inch 4 lbs I have left all of thes

 

Slaymaker lock with Key that isworking, Total of 15 pieces some nice vintage Keysfound in one of grandpa's old tool boxes inkFrog Analytics

 

HUOT JEWELERS DRILL BITSPAT. NUMBER 1930617VINTAGE!!IN GOOD CONDITION!! Posted with eBay Mobile

 

FIVE Vintage antique tools - various hand taps. Greenfield in box 2 9s, Craftsman 6/8-11, C B & T 29/32 & Greenfield 3/4 as best I can read. I have knocked most the surface rust off the two an

 

These ax is well use. See pictures. Posted with eBay Mobile

 

UP FOR AUCTION IS A VINTAGE DISSTON 10" BACK SAW. THE BLADE HAS A SLIGHT WAVE IN THE MIDDLE AND THE HANDLE HAS A TIGHT CRACK NEAR THE NUT. 1896-1917 MEDALLION 11 TPI. ONLY PLATE STAMP IS VISIBLE.PLEAS