Up for bid is old bath hardware. Marked "The BrassCrafters". The 6 inch brass robe hook is stamped "The BrassCrafters". There are two 5 inch shelf brackets for a glass shelf, stamped "The Brasscrafter

 

This is a vintage stanley model 190 wood plane this plane looks to be in very good condition

 

Complete set of 13 Vintage IRWIN Auger Drill bits in original oak box & manual One each of the following sizes 1/4 - 5/16 - 3/8 - 7/16 - 1/2 - 9/16 - 5/8 - 11/16 - 3/4 - 13/16 - 7/8 - 15/16 and 1

 

PEBARO Child’s Wood working Tool Set; looks to be 1950’s; the set appears to be unused; there are 9 tools (something missing? can only be 3” x 3/8” x ¾”; see slot next to the drill bit); si

 

Nice old antique lock an on the front lock works fine opens and locks. The key looks like it says Corbin and 407 on back of the key. Shipping $4.75

 

Up for auction are 7 Snap-On 3/8" Drive Hex Bit Sockets Plus a Philips #2 Bit FPD22. The Hex bit sockets include 1 FA-5A - 5/32", 1 FA-6A - 3/16" (missing the hex bit), 1 FA-7A - 7/32", 1 FA-8A - 1/4"

 

For sale an extensive lot of lathe tooling - All sizes included - At the top a large selection of cut-off types as well as larger flat tooling - 6 x 1 inches on the larger pieces - Approx. 13 lbs. of

 

This is a SARGENT No 714 Auto-Set smooth bottom plane in as found condition. The plane is 14 inches long with a 2" wide cutter that is marked SARGENT and 714. The Sargent name and 714 is also behind t

 

Bernz No. 7 Self-Acting Torch / Blowtorch - This little self-acting, 1/4-pint gasoline blowtorch was manufactured by the Otto Bernz Company of (I believe) Rochester, New York. I say “I believe” be

 

9 New Craftsman Screwdrivers These screwdrivers are in a handy carry case (also made by Craftsman)- Includes flat and Phillips head blades shown. All handles still wrapped with barcode lables. These h