A large vintage Brass Mounted Steel Padlock, with a single working key. The swivelling keyhole cover is marked “Improved Tumbler Lock”. It measures approx. 4 1/4” x 2 ¾” x 7/8” overall. The

 

A beautiful, light joiner, Stanley/Bailey 6 plane, with finish baked on and heavy casting base. The base is rust and pit free and has been milled .005 flat on the bottom and sides. There are three pat

 

Vintage 1940's Black and Decker Vibro-Centric Valve Seat Grinder with everything( actual pictures) THIS ITEM IS FROM THE 1940's AND ITS IN GREAT SHAPE. BLACK&DECKER VIBRO-CENTRIC VALVE SEAT GRINDE

 

.. . . . . . .. ......WE !!!! GIVE !!!!!!!! HUGE !!!!!!!! SHIPPING !!!!!! DISCOUNTS !!!!!!!ON ALL ORDERS THAT ARE PAID FOR AT THE SAME TIME . YOU CAN BID UP TO 7 DAYS IN A ROW AND WE WILL CONTINUE TO

 

Old Tool,Japanese WOOD BLOCK PLANE Kanna, "Ginkgo minimal surface",2.5mm. Description Old Tool,Japanese WOOD BLOCK PLANE Kanna, "Ginkgo minimal surface",2.5mm. Craftsman furniture and joinery toolsCon

 

Two Vintage Hand Crank Drills, both in only fair condition. See photos and Condition Description. Parts? Steampunk?

 

Makers name overstamped. To cut a a 1/4" cove. Some bruising to the heel and wedge, otherwise good. Stamped 5/8 and 4/8 on the heel (?)

 

No. 14 1/2x15/16 ratcheting open-end wrench, marked with "No. 14 Simplex Ratchet" and "Nickel Molybdenum" forged into the front panel, with the size ranges forged into each end. The reverse panel is m

 

Miniature solid stainless steel continental blacksmith anvil with side-shelf, hand polished, was made about 14 years ago by Engel Creek Forge. Measures 4 7/8" long and 2" tall.

 

Disston and Sons Hand Saw 26 inches With Nib circa 1898-1917 I believe this is a No. 16 saw but I can't see Etching to be sure. The etching on this saw is not readable not sure if you would be able to