THIS UNIT NEEDS A TYPE 5AR4 RECTIFIER TUBE OTHERWISE WILL WORK GOOD SOLD JUST AS PICTURED THIS UNIT IS FOR AUDIPHILE GRADE AUDIO. IT COMES WITH EVERYTHING YOU SEE. THE TUBES TESTED OK AND THE FRONT PL

 

I just got this from an estate sale and it powers up and appears to be in good working condition but I couldn't test everything out. It's in very nice condition all over but on the back the whole way

 

This auction is for a 10" Akai alum.take up reel in nice shape.There is no factory box for this item.Please pay with paypal and only USA bidders.Thanks

 

JBL 2441 alnico large format driver similar to 376. A full restoration for cosmetics and performance. New paint as needed, rotted foam in back cap replaced, disassembled and cleaned. Magnetic surfaces

 

Absolute rarity - really "high end" from year 1955 - quadro cinema tube amplifier 4 x 25 Watt / 200 Ohm / 15 Ohm respectively 2 x 50 Watt / 100 Ohm / 8 Ohm Amplifiers this type were produced by Rohde

 

rlc1951 Store MAXELL UD 35-180 10.5" METAL REEL w/SOUND RECORDING TAPE IN BOX LITTLE USE STARTING BID OF $9.95 AND NO RESERVE PLEASE CHECK MY 100% (3000+) FEEDBACK RATING THIS ITEM SHIPS WORLDWIDE (ST

 

Antique Skantic F 62 KC/MC 49M Band Tube Radio Works - Made in Sweden Condition: Item was powered on/play tested, but no further testing was done and appears to be in working order. The unit is in wor

 

You are bidding for the following vintage mil spec items: Two ceramic rotary switches made by CRL - Centralab - JVC Type JV9000NH Silver contacts (for construction quality refer photos), each rotary s

 

Pair of MAZDA AC/P tubes for PX4, PX25 etc. I collect it for many years but do not use.I believe it is new. Now I sell it. I make a DIY project in PX4 and PX25 amp and use AC/P, MHL4, MH4, AC/HL befor

 

UP FOR AUCTION VINTAGE EMPIRE CARTRIDGE ADAPTOR. HAS SHURE CARTRIDGE & MOUNTING SCREWS, SPACERS & SLOTTED NUTS. EXCELLENT CONDITION.