vintage drill bit holder from the Cleveland Drill bit company. Ready for your collection or work

 

Vintage / antique Set of Bevel-Edge, Full Size Chisels with the patented Split-Proof handles. Footprint/Marples Sealed in Factory Box until I took these pics, as you can see, as the pics detail. I do

 

Two steel squares made in Germany by Helios. They are in original Helios wooden box. They measure 3 1/8" X 4 7/8" and 2" X 2 7/8". On each square is etched the word Helios Made in Germany. The larger

 

Stanley plane no 3 sweet heart in good condition. No damage to the plane other than some minor varnish lifting on the knob and tote as well as some scuffs that you would expect to find with a vintage

 

Disston and Sons Hand Saw 26 inches With Nib circa 1898-1917 I believe this is a No. 16 saw but I can't see Etching to be sure. The etching on this saw is not readable not sure if you would be able to

 

Here is a L.S. Starrett Combination Square Set. Looks to be 3 tools in one. Has a 3 inch rule with two sliding attachments. All three are marked Starrett and are in excellent condition. Made in the US

 

Vintage Disston & Sons "DISSTON JUNIOR" Woodworking Hand Saw in Very Nice Condition!Vintage Disston Junior Saw (8-TPI) Saw 23 5/8" long. This saw cellebrates 100 years in business and shows a date

 

Obtained large collection from old-time life long collector and will be putting many on over next little while. All have either original or re-worked keys or non-original keys that work... ALL WORK!!!

 

A small, vintage, tubular shaped, pocket, Brass Spirit Level, with a flat bottom. It is fitted with clear glass & fluid. It measures approx 2 ¾” overall. It is in lovely condition for its age.

 

This is one lot of vintage or antique blacksmithing tools. There are five tools total. There is a 14 1/2 inch by 5 1/2 inch by 2 inch hammer. There is a 19 inch pair of tongs. There is a 23 inch set o