VINTAGE TRUE TEMPER, GENUINE, CARPENDERS HATCHET AXE HEADAXE HEAD IS 6 3/4" LONG AND WEIGHS 1 LB 12 OZ AXE HEAD IS USED IN GOOD CONDITION.VERY LIGHT PITTING AND SURFACE RUST. EYE IS IN GOOD SHAPE AND

 

From the 1940s. About as nice as they come. A little light surface rust in the corners and on the unpainted hardware. The trays look nearly new. Smells like an old tackle box. About 18" long, 7" wide

 

Up for your consideration are these 2 Vintage Skeleton Keys- Hollow ends, ornate - 1 measures 2" long the other is 1 7/8" long with 3/4" tops. In very good used condition. Thanks for looking~ If any o

 

You are looking at a vintage double bit axes head. No name that I can see or make out. There are signs of wear and or rust. Look at all the pictures for condition. This axes head would make a perfect

 

deere140 Store Here are 2 use Marples wood chisels. They are 1/4" and 3/4" wide. The 3/4" is marked MADE IN SHEFFIELD ENGLAND. These have plastic handles with rubber grips. These are about 9 1/4" long

 

Japanese vintage bench chisel. The brand is MURAKUNI. The chisel has been sharpened with #800 water stone. The cutting edge is 6mm. The length is 205mm. The weight is 70g. I will combine the items to

 

This thing is truly an engineering marvel, a fan adapter for a standard 2 D cell flashlight. As you can see the design is of a squirrel cage type fan with a tack welded housing. The unit is totally ha

 

For yor consideration One wood and metal barn pulley. The diameter of the wheel is 5 inches. It is approximately 8 inches tall. There is a peice of wood missing from the wooden wheel. ( see picture #4

 

This is an infill smoothing plane. It is a casting so not dovetailed. The casting is about 8 1/4 inches long and the blade width is about 2 inches. Stuffing appears to be Walnut. Blade is marked Buck

 

I am not knowledgeable about tools, other the basic identification. I can tell you that the largest piece is 9.5" long and about 1" at widest point. Thanks for looking and please ask questions before