Good shape with no cracks or breaks. A little surface rust in some spots. Cutters are correct and present. No damage to the cutter hold downs or any place else on the plane. Marked STANLEY and MADE IN

 

Here is a vintage wood and brass Stanley caliper rule. It is # 36 1/2 and is warranted boxwood as etched on the rule. The wood is worn and smooth, and both the brass hinge and caliper are tight and in

 

Wood Auger Bits 11 wood auger style drill bits ranging from 1/4 to 1" some duplicates and not Most are lightly rusted but should clean up. There are 11 bits that are about 9 ½ inches long. No bad kin

 

Sharan1957 Store These are two brand new in the package storage unit locks and each has two keys!!! These are the hardened stainless steel locks with ten year warranty and solid brass 5 pin tumbler wi

 

VINTAGE SNAP-ON 3/8" FERRETT #F-10-H BREAKER BAR 11". EXCELLENT CONDITION. NO PREVIOUS OWNER MARKS. Posted with eBay Mobile

 

This is a small vise that measures appox. 9 x 5 1/2 inch as seen in photo. I will be listing other small vises and some with a anvil and I will combine shipping. I believe this one has CE Billings on

 

ANTIQUE CAST IRON AND WOOD PULLEY MYERS #299 This is a very old farm piece. The cast iron part of it appears to have been repainted sometime recently, but the wooden wheel was left "as is" to lend cre

 

ANTIQUE WOOD MOLDING PLANE by THE DOBSCHER? PLANE & TOOL CO.SAUGATUCK,CONN ? - It is approx.9 1/2" x 3 1/2" x 1" in size not counting the blades,it is marked on one side THE DOBSCHER? PLANE &

 

Normal 0 false false false EN-US X-NONE X-NONE 5X Rebate planes A group of 4 Mathieson rebate(2”,3/4”and ¼”) anda dado plane, all are in good condition. There is also a Varvill Dado missing the

 

PRESISSION TOOL ,DIAL INDICATOR USED ON SOME TYPE OF MACHINE