This is a front knob and fixing screw for a stanley defience 14" inch jack plane, it has a bit of the finish marred as you can see in the pics.

 

The anvil itself weighs about 15 1/2 pounds ON MY BALANCE BEAM SCALE. , SOME EDGE MARKS BUT NOT BAD . The face is flat again some hit marks . This well made little anvil has both Hardy and Pritchel ho

 

YOU ARE LOOKING AT A VERY NICE STANLEY BAILEY No.4 SMOOTH PLANE.IT IS SIGNED No.4 IN FRONT OF THE FRONT KNOB, BAILEY BEHIND THE FRONT KNOB, STANLEY ON THE LEVER CAP, STANLEY MADE IN USA ON THE CUTTER,

 

Antique cone shape typ probably German made.brass plum bob with iron tip,in very good condition.unmarked c. 1880- 1920.diameter : 3,5cmlenght:7cmweidht:7 OZ ,199gr.shipping worlwide 15usd to USA 12usd

 

This is a vintage wood pulley with metal frame There is a star on both sides of the pulley Notice the wood has damage on one end, but it is not brittle, so the rest is okay Item measures 11 ½ inches

 

No rust on the box and you have to look for scratches. You Hardly find these boxes as nice as this one which you will see when you check out the pictures as they are the main part of the description d

 

A 5 inch tall hand vise with jaws that are 1 1/2 inches wide. The spring between the handles has broken off so you have to manually open it. Other than that it is a good user. Handy for holding smalle

 

Offered for your bidding consideration is a very nice general purpose smoothing plane made by Stanley, Model No. 3. This little guy is shop ready. The iron (cutter) has a clean sharp edge. Everything

 

Here's a old lot of 20 hollow Barrel lock keys that range from 2 5/16" longest to 1" shortest. They are in used but very usable condition, old patina. Nice! All Sales Final.No Reserve

 

Old Japanese Tekagi Tobi-guchi Hand-gaff Vintage Junk woodworking tool Daiku DIMENSIONS Overall length 310 (mm) Weight 137 g Vintage Junk Tekagi or Tobi-guchi, Hand-gaff. It's used to pull things/wood