THIS LOT OF 14 ANTIQUE BRACE DRILL BITS ARE ALL IN NICE CLEAN CONDITION ! ! ! THE TWO LARGEST ONES ARE MARKED J. BOOTH A-1. THE COUNTER SINKS ARE MARKED WITH NO. 1, 3, OR 4. PAYPAL PAYMENTS ARE ACCEPT

 

Vintage boxwood and brass Button Maker's caliper rule No 1461. 3 inch rule marked with brass caliper slide in 1/40ths of an inch. The edge of the rule is marked J Rabone & Sons, so it predates the

 

MINT N.O.S. 1/2" Punch Hammer... Here is a very nice hammer that is New Old Stock and still in excellent condition... The punch end is mint, measures 1/2" sqaure at the tip and expands to 1" at the co

 

This is a rare long handle 1/2" ratchet.Vintage Craftsman 15" long with no markings at all.I believe this was bought and never used. Was oiled and tested before listed.

 

Band Saw (PICK UP IN NJ ONLY) NO SHIPPING AVAILABLE. In very good working conditon with stand and craftsman motor gold /brown in color. Used in very good condition I don't know much about old band saw

 

These are in fair condition for their age. The little one does not have a makers mark, only made in USA on it. The Stanley has 190 Stanley Made in USA on it. All I know about these, if you need more p

 

Klein 9 1/2 inch Lineman Pliers, D213-9NETP. They're in good shape!

 

New from Dealer Stock, Office waste can, made of aluminum. approx size, 10" diameter at top and 16" deep. Dimensions approx only may be a little larger ( 3-Available)

 

This offer is a vintage Jeweler's or Silversmith's "Chasing Hammer". This hammer has a 1 1/4" dia. crowned face. The hammer is 10" long, and weighs about 6 oz. The top of the head is lightly stamped;

 

Antique wooden moulding plane Makers mark is Robert Wooding Plane measures 9 1/4 Inches, so it has possibly been cut down. Unsure if the wedge is original. Needs cleaning up. email with any questions.