Here we have another Keen Kutter Plane, a KK 5 C with a corrugated bottom. This is one of the most common of the bench planes offered by the E. C. Simmons Co from 1906 thru 1912. The plane is 14" long

 

This is a handmade Damascus Paring chisel made by master blacksmith Iyoroi in Japan. The lamination is made of Blue Steel for the cutting edge and multi layered Jigane (soft steel) for the body and sh

 

putipa Store Description Vtg Mod 8920 Hanson Viking 200 lb Scale with Hooks Hunting, Farming, Fishing UIB This vintage hanging scale comes in its orginal box and will weigh up to 200 pounds in 2 pound

 

FOR SALE A VTG. SINGLE BIT AXE HEAD / PLUMB. IT DOES HAVE A FEW SMALL NICKS, BURRS, SCRATCHES AND TANISH. IF CLEANED UP THERE MAY BE SOME SMALL PITTING. BLADE LOOKS GOOD WITH JUST A COUPLE TINY NICKS.

 

ANTIQUE CAST IRON AND WOOD PULLEY MYERS #299 This is a very old farm piece. The cast iron part of it appears to have been repainted sometime recently, but the wooden wheel was left "as is" to lend cre

 

Here is a nice old precision vise from L S Starrett, Athol, Mass., #86. The tool has the bench mount that is cast and can fit a top up to about 2 1/8" thick. The 1 1/2" wide jaws open to 1 1/2"and hav

 

Very nice logger's stamp hammer in excellent condition. The head measures 5 1/2" long. The marker is 2 1/4" x 1 1/4"and the stamp rises 3/8". The very solid handle measures 16 1/4" long. Excellent col

 

Vintage Buck Brothers chisel lot of 8 hand tools made in Millbury, MA, USA. Includes four gouges and four chisels as described below.  1. 5/8" shallow sweep gouge. 2. 7/16" very shallow gouge. 3. 5/8

 

FOR SALE, VTG. ANTIQUE BROAD HEWING AXE WITH 10 3/4" BLADE. IT IS STAMPED BUT I CAN NOT MAKE OUT THE NAME, SEE PICTURES. IT DOES HAVE SOME NICKS, BURRS, RUST AND PITTING. WHAT LOOKS LIKE A CRACK ON BL

 

Great Set AUDELS Guides. . 4 Books. .Plumbers & Steam Fitters. . Original Copyright 1925, reprints 1947, 1948, 1949. . Leatherette type covers. . 6 3/4" x 5". . All books in very good condition, s