This item for auction is an Early Antique Pond Sailing Ship, with many restoration Parts. The Hull is a fraction over 35" inches long. With the Bow extension piece, it's a little over 39" inches long.

 

HELVIC'S NAUTICAL LANTERN AGE UNKNOWN. WORKS 10 1/2" TALL FROM BASE TO TOP OF RING 4 " BY 4 1/2" BOTTOM OF BASE ON THE LAST TWO PICTURE SHOWS IT DOES LIGHT UP PAY PAL ONLY AND SHIP ONLY IN USA AND PAY

 

FEDERAL BRASS/BRONZE/NIBRAL CUP RIGHT HAND PROPELLER 17" X 18 PITCH 1-1/4" BORE TAPERS TO 1" APPEARS TO BE IN VERY GOOD CONDITION...NO CHIPS OR CRACKS(SEE PICS) MARKINGS: FEDERAL,17RH18, NIBRAL CUP, 1

 

Three Vintage Kolstrand Fishing 4" Pulleys Working Made In Seatle Wa. Please See Pics

 

This Very Unique Pocket Compass Made In France Comes In Its Original Wooden Case With Black Leather Wrapping. The Leather Is However Missing From The Back Side Of The Case. The Case Still Has Its Orig

 

THIS PUMP IS MADE OF GALVANIZED METAL WITH A LATHE TURNED WOOD HANDLED PUMP STICK WITH THE GENUINE LEATHER BOTTOM STILL ATTACHED. IT ALL DRY NOW SO NEEDS TO BE REPLACED. THE PUMP WORKS BY ADDING WATER

 

This Perko bow lamp has red and green lenses. It measures 9" high with loop folded down. It's 5" wide and 4 1/2" deep. I've been able to determine that it was manufactured between 1932 and 1947. Ships

 

Here is a massive Commodore clock by the Chelsea Clock Company, circa 1910. This was retailed by Grogan Company of Pittsburgh. The dial on this is 8" and the entire clock stands at 12 1/4". Works perf

 

We have a few hundred of these so we are just going to pick the first ten out of the bin. Size, wear, and shape vary! This auction is for 10 cork fishing net floats we got out of an old fishing net sh

 

up for bid is a set of two Vollrath stainless steel boat cleats they are 4" long by 1.75" high and 2.50" wide there are some marks on them from use but really nice vintage look any questions just ask