ANTIQUE WATERBURY CLOCK MOVEMENT PARTS or REPAIR dated Sept 13, 1898. I am uncertain of the operation of this mechanism and or if it is working or not. Compared to many others on hand it appears to be

 

This Linden Clock was wound on a regular basis for about 20 years and be the original owner but when he passed away, it was neglected for over 10 years. I wound it a little to get it going and nothing

 

Antique movement for French mantle clock parts/ repair.The dial is damaged but still has the original hands.Comes with bel and back cover.Diameter of the movement 82 mm.Diameter of the dial cover 116

 

Untested Big Ben Westclox , it might work or can be used for parts

 

Ingraham Banjo Clock made by Ingraham Clock Company. Walnut finish case with an eagle finial at the top and its brass pendulum swinging at the bottom.. Keeps good time and sounds chimes on the hour an

 

I believe this was working when it was separated from its wood-boring beetle Victorian case. But, I cannot guarantee it.

 

These genuine Hermle weights were ordered by me in the early 80s with some grandfather movements, I lost track of them and found them the other day while cleaning the cellar. They have a little rust o

 

FRANZ HERMLE MANTEL CLOCK MOVEMENT IS FOR PARTS OR RESTORE. THE MOVEMENT STILL WORKING, NO BROKEN PARTS IN IT, WOULD NEED CLEANING THE PLATE IS 4'X4" THE TIME WINDING ARBOR DISTANCE FROM THE CENTER SH

 

If you have any questions, please make them before bidding. Thank you. Vintage Jaguar Swiss Made Clock - parts or repair - handwind, signs of oxidation due to the years, 50mm x50 mm, not working Check

 

I found this cool old clock at a local estate sale! It is a Howard Miller!! Looks real nice, but missing pendulum & wire to suspend it, and back cover is gone - also, no key. An easy job for the c