Lot of Vintage Engraving Repousse Tools DESCRIPTION: Lot of 40 assorted unique vintage engraving tools. These antique tools were used by a Master Engraver between 1950 and the Millennium, prior to ret

 

Collection from a machinist tool box. Pin and center punches.Mostly unmarked.

 

This auction is for a lot of five vintage skeleton keys. Authentic antique iron keys, old and rusted with age. These skeleton keys vary in size from 1.5 inches long up to 2.75 inches long. Five keys w

 

Up for bid is a USED VTG Electric STANLEY Drill #DC8313N -1950S Era Volts 115CAP 1/4Type 142RPM Load 1000RPM No. Load 1400With KeyWorks GreatThis is used. Does show some wear from use.Does show some s

 

UP FOR BID I HAVE A PLUMB DOUBLE BIT AX HEAD. THIS HEAD MEASURES 9 7/8" LONG, IT HAS 4 3/8" BLADES. BLADES DO HAVE SOME CHIPS (SEE PICTURES) THERE IS SOME MINOR PIN PRICK PITS. DOES HAVE A NICE DEEP P

 

Vintage Lixie P-H Pin Head Brass/Bronze Hammer Handle Punch w/ Wood Handle 1/4" across punch, 9/16" across hammer end, 2 1/4" head length - 9 7/8" length See photos, they are part of the description

 

YOU ARE BIDDING ON A GREAT VINTAGE TOOLTHIS IS A CLEARLY MARKED BROWN & SHARPE607 DEPTH MICROMETER MACHINIST TOOL IN WOOD ORIGINAL BOX....THIS IS NOT SOMETHING I AM FAMILIARWITH SO PLEASE LOOK AT

 

From an estate. Good, usable PROTO slide hammer as shown. +/- 27-1/2" long. Hammer is 2" diameter. Tool makes a great finger pincher also. Straight. Threads are good. Some surface rust and old dust. A

 

Offered is a lot of alligator wrenches . these have pat dates of 1906. one of them reads the K & B CO. the others have writing however i can not read it. these will all be wrapped to ensure safe a

 

This pulley is 6 3/4 lb. in weight. The wheel is 9 1/4" in dia.. The frame is 11 1/2" in length. The hook is 3" long. There is place in the frame where you can take the hook. out and replace it. Pulle