An Old, Blacksmith Made, CANT HOOK with Pole Hardware attached. Total length is 12 inches. Note what looks like a crack in flat strip is where two pieces were joined and were not hammered out smoothly

 

Here is a Vintage Old Carpenters EXPANDING RIDGWAY AUGER BIT still with the original wooden box with a faded Power Ridgway label ALL ORIGINAL STAMPED-RIDGWAY SHEFFIELD Power and Logo Condition=In vint

 

used chisels but in very good shape.

 

Listed here is this Snap on , torqometer 1.5 inch pounds 1/4 drive TQSS012 a nice torque tool 24 oz. This is a good working tool. The lense is missing and will need replaced.

 

LOT OF 64 SKELETON KEYS, YOU GET WHAT'S PICTURED!flat ornate, brass, skeleton, hollow barrel double bit padlock keys, ADVERTISING FOB'S, BASCO KEYS, MASTERLOCK, FRAIM, ETC... CLICK RIGHT HERE ( other

 

For sale Top Quality Carpenter, survival Hand Axe, Axe 31cm long 12.5 cm wide head Around 11.5cm Blade cutting edgeTotal weight is around .25 kilo approximately The Axe has been polished , handle is p

 

You are bidding on a Great Assortment of Vintage Keys. There are over 100 keys in this lot. There's 1 small cabinet key, some flat steel cut keys, about a dozen of the old master keys with lions and s

 

Showing the earliest Mathieson mark. Stamped 1 and 5/8 on the heel (faint) for 5/8" sash bar. In good used condition, some slight bruising to the wedges. Good irons, one marked Hildick.

 

Millers Falls #22 woodworking plane in very good condition. No breaks, cracks, or repairs. 22 inches long X 2 7/8 inches wide. Solid nut adjuster. Back edge of plane has some yellow paint. Please look

 

Forged Blacksmith Flatting Hammer Please read all payment and shipping instructions before you bid or pay- see Buyer Checklist below. This auction is for a Vintage, Blacksmith Anvil/Forge, #2 Flatting