Here is a antique saw marked SANDERSON BROS & Co. SHEFFIELD C & M 1901. It is in good working condition with no chips. The blade is good and sharp. It measures 13 3/4" long. The blade is 9" lo

 

good used condition

 

There is a Barron multi purpose wood planer, three small hammers, a 1-32 KK punch, a Stanley Yankee #4595 screwdriver, a cast iron level, no maker's mark, a 6 inch sliding T bevel, two sandcasting too

 

Mrsdeadhorse Store Here we have a very nice classic s. j. Addis bent gouge carving chisel with an outside grind shallow sweep edge that is 7/16 inch across. These English made chisels are considered b

 

Stanley Miter Box No. 2358A & Original Disston Saw Super Clean Previous Owner scratched Identifying marks into both As Found Sharp Saw probably original with Box (Both are from the same period) Ex

 

You are bidding on an old antique woodworking tool. This vintage saw is made by Henry Disston and Sons. The makers mark is barely legible, in the right light at the right angle, you can make out what

 

This is an S.J. Addis No. 25 Front Bent Spoon Bit Gouge Wood Carving Chisel 3/8-Inch Wood Tool This S.J. Addis Wood Carving Chisel is a 3/8-inch-wide No. 25 Front Bent Spoon Bit Gouge Wood Carving Chi

 

This is a TWO MAN CROSSCUT SAW WITH A FIVE FOOT OVERALL LENGTH. The saw has been polished by me with a soft wire brush and it is as it appears in the pictures. The saw weights about 6 & 1/2 pounds

 

Hammers with HUBBARD handlesHeads are not marked HUBBARD, but they appear to be original to the handlesHandles good with no bug holesThree handles marked HUBBARD TOOL DIV on one side and HUBHANDLD on

 

wordman654 store Another beautiful Pulley has travelled forward through time more than a hundred years to share a story of American ingenuity and integrity. Every beautiful scuff and well earned scar