OK... Here is a really neat set of brass scales. In great condition. I think they were made in the early 1900's and are from Portugal ?? Spain .. Heavy , all weights are in place. Lots of detail !! I

 

THIS T.H.WITHERBY DRAWKNIFE [SHAVE] COMES FROM A HUNTING LODGE IN VERMONT. IT WAS A WALLHANGER DISPLAY. ITEM THE ACTUAL CUTTING EDGE IS 10 INCHES

 

This is a True Temper Kelly Works Axe that weighs 4 lbs 9.5 oz. with the handle. The handle measures 25 1/4 inches. The single bit is 5 1/2". The butt of the axe is 3 1/2". This s a very tight axe wit

 

28 DIFFERENT SKELTON-BIT-PADLOCK-MORTISE-RIM-TRUNK-CABINET MIXED KEYS. 1-1/4" TO 3-1/4" IN LENGTH KEYS. BRAND NAMES (SARGENT, CORBIN, ETC.) THEY LOOK ALL TO BE DIFFERENT. SHIPPING AND HANDING CHARGE L

 

these catalogs have some soling and general wear - creases and deposits on the covers. the most wear is on the 1973 catalog in the lower right corner. also some overall 'waviness' to the catalog. othe

 

Antique or vintage western block and tackle. It is wooden and has a cast iron hook. The pullies turn freely and it is in worn, but fair condition. It does have a crack in one side. Great old collectib

 

On offer is a bundle of 6 short shaft vintage keys - handy for the furniture restorer. All appear different range from 30-48mm long. Came from an estate where much of the material was from the 1950's

 

Here is yet, another great lot of 8 vintage and newer hammers in different forms for your silversmithing, blacksmithing and general metalworking needs. Using the 1st photo, from left to right, here is

 

old. other than the information I found from a quick net search I know nothing about the saw. overall length: 15" blade length: 10" back length: 9 5/8" a rivet is missing from one side of the handle.

 

Two machinist jacks.They stand 2-3/4" and 2-1/4" tall.Pics show them well.Good threads on both.