For your consideration is this vintage brass horse hoof measurement gauge. These gauges are used for determining the exact hoof angle and toe length of the horse so that both of the horse's hooves can

 

Fancy C19th. 24 Inch Two Fold Brass Ruler by John Rabone & Sons Birmm. With decorative hinge plates and only one slot disc retainer. This is a vintage 24" J. RABONE & SONS - BIRMINGHAM ENGLAND

 

ALL MADE IN THE USA EXCEPT THE LAST TWO PICTURESTHE 1/2"DRIVE RATCHET IS ACTUALLY A EASCO TOOL THAT IS THE EXACT SAME MODEL AS THE CRAFTSMAN IF FOR ANY REASON YOU ARE NOT HAPPY WITH YOUR PURCHASESEND

 

This auction is for 10 vintage C clamps.

 

This is a Millers Falls No.42 coping saw that is in fair shape. It is missing most of the nickel plating. The mechanism is sound and in good shape. The ferrule on the handle has a crack in it. The MF

 

This is a nice vintage, bevel edged socket chisel marked STANLEY and MADE IN THE USA on the socket. The cutting edge of the blade is 3/8 inches. The steel section of the blade is about 5 inches includ

 

This is a set of KEEN KUTTER Brace Bits in box. The box has a label inside that is marked Set A Simmons Hardware Co. The bits in the box do not match the label.The bits are numbered 4, 6, 6, 7, 8 &

 

this has the corrugated bottom it is missing the back handle it has some surface rust and needs a good cleaning great ol plane please email any questions thanks

 

HANDFORGED EARLY ROUGHING GOUGE. RARE IN-CANNEL GRIND. CLEAN & SHARP. These heavy duty stock-removal gouges, called "U" chisels due to the full half circle profile, are rare. To find one with a ha

 

Antique, vintage red painted die cast iron Detecto merchant/hardware scale has decal with the name “James Geddes & Co. San Francisco” on front and seals from the 1950s on back. The scale is ap