You are bidding on 2 outside calipers - 5" (Union Tool Co.) and 3 3/4" (Goodell Pratt Co.). The small caliper's look like the pivot screw has been replaced. They are clean and in good condition.

 

If you like vintage and antique tools, then Check out my other items! Nice vintage mallet.Measures approximately 11" long. Head is approximately 5" long x 2 1/2" in diameter. The entire mallet weights

 

This set is sized as follows: (width x steel length x overall length) 1-1/2" x 7" and 13-1/4" overall, 1-1/4" x 7-7/8" and 13-3/4" overall, 5/8" x 6" and 11-5/8" overall, 1/2" x 6-3/8" and 11-5/8" ove

 

This is for this working Bostitch heavy duty stapler as shown with a 1/2 a box or more of staples. Size of this is approx. 40 cm L x 32 cm widest.Please check pictures carefully as they make up a larg

 

_1 crimper Thomas & Betts WT110M you pay shipping $ 6.00 in 50 states. bid with your confidence, happy bidding and thank you for watching.

 

Lot of vintage drill bit augers.Different sizes and ends.Some rust but nothing that will effect their use.

 

This auction is for a rare vintage "TRU-TEST" 1/4" Drive Ratchet. The ratchet is used, shows some light wear and is in good working condition. No.T1060-1 4-5/8" long There are No owners marks. Comes a

 

Here is a vintage T.F. Deck Gravity Level Co. Toledo Ohio inclinometer/level. It is in good vintage condition with a crack in the glass lens. The wood looks to be a cherry or maple hardwood. The corne

 

The Block is a very good working condition .it is 10in tall 6in. wide and 4in thick I will Ship it to you priority mail you will get it in three days or less. Good luck on your bidding

 

FOR YOUR CONSIDERATION IS THIS VINTAGE E. C. ATKINS KEY HOLE SAW.SHOWS SOME WEAR. PLEASE REVIEW PICTURES AS THEY PROVIDE DESCRIPTION OF THE ITEM.Shipping cost to your location can be calculated in the