VINTAGE 4" WILTON USA NO.4404 SUPER DEEP MECHANIC MACHINIST C-CLAMP. EXCELLENT CONDITION. NO PREVIOUS OWNER MARKS.

 

Large Framing Mortising Chisels Include 1/2" Mortise and 1/8" Mortise Corner.

 

Bob is marked K&E CO. N. Y. see photo three. This is a working bob with three types of metal. The very top is brass the top middle section looks like copper. The bottom middle is brass and the ver

 

Antique seal padlock with working key. Brass and steel. About 2-3/4" inches tall and 2" wide The lock does not " pop " open. Just turn the key ninety degrees then pull on the bail. Seven flat keys, ma

 

NEW ROSEWOOD SOCKET CHISEL HANDLES set of 3 THEY APPEAR TO BE IN THE SHAPE OF THE OLD STANLEY 750'S - WITHOUT THE LEATHER WASHERS SOCKETS TAPER FROM APPROX .600" TO .380" FOR PARTS OR REPAIR OF YOUR O

 

HERE WE HAVE TWO VERY DIFFERENT PLANES.I HAVE SEEN MANY OF THE LARGER ONE BUT THE SMALL ONE IS VERY SPECIAL AND VERY COLLECTABLE

 

nice lot of antique skeleton keys, mixed condition. see photos.

 

DESCRIPTION: This auction is for a vintage double bit axe head. This head is 9 5/8” long with two (2) 4 1/2” long cutting edges. Overall the cutting edges are in good shape with a few nicks presen

 

auct10258 Store ANTIQUE BARN PULLEY, TACKLE BLOCK, WOOD PULLEY, STARLINE ,VERY NICE PULLEY, COOL STAR The wood wheel turns freely & the ring at the top turns 360'. This pulley would compliment any

 

Very Rare Turner No. 93 Double Swivel Double-Jet Brazing Blowtorch – This quart-size, bottom-fill, gasoline blowtorch was manufactured by the Turner Brass Works of Sycamore, Illinois. This is the sa