2 Nice Small Collectible --4 oz--Ball Peen Hammers plus --10 1/2" --& --9 1/4" Handles. One stamped---Maydole-- and the other--Vaughn. Very little dings, etc. Have--3 1/2" heads---with --3/4"--ham

 

here's a vintage henry disston mitre saw. the blade measures 10". it has the normal wear from use, but doesn't seem to be all beat up. it has the number 18 stamped in the wood next to the medallion. a

 

This item appears to be in good, pre-owned condition. It has not been tested in any way so please refer to photos for condition details. Both screw arms turn and adjust easily. The top piece of wood (

 

Here is very nice example of a Stanley number 18/19 smooth bottom smoothing plane. It was made around 1947. The original japanning is about 95 percent on the body and 95 percent on the frog and retain

 

This is a large lot of 7 old antique drawknives , most have rust to them and pitting . Some still sharp , most with worn or broken handles , some handles good . Some may be useable as they are . Resto

 

245 keys blanks old vintage cut key blanks

 

If you like vintage and antique tools, then Check out my other items! Nice vintage mallet.Measures approximately 11" long. Head is approximately 5" long x 2 1/2" in diameter. The entire mallet weights

 

This is a nice old heavy duty Charles buck 1 3/4" gouge chisel......its in good working condition and has a good new solid handle that shows no wear to speak of. .The chisel itself is in good shape as

 

This is an antique hammer/mallet by E C Atkins & Co. It's #3 and measures 13.25 inches long. There is some damage to the end of the handle, otherwise, it's in excellent condition! Buyer prepays in

 

Antique spike ax with leather case. The wood handle is 13 3/4 inches long. The axe head measures 6 7/8 inches from blade edge to spike tip. There are no maker's marks on either the ax or the leather c