This set is sized as follows: (width x steel length x overall length) 1-1/2" x 7" and 13-1/4" overall, 1-1/4" x 7-7/8" and 13-3/4" overall, 5/8" x 6" and 11-5/8" overall, 1/2" x 6-3/8" and 11-5/8" ove

 

UP FOR BIDS IS A VULCAN NO. 2 CHAIN PIPE VISE. MADE BY J.H. WILLIAMS CO. BUFFALO NY THE VISE IS IN GOOD WORKING CONDITION. JUST BOLT IT DOWN ON A TABLE TOP AND YOUR READY TO GO. IT WEIGHS 10 LBS. 5.6

 

Audel's Carpenter's and Builders Guide Number 1, 1951 Edition, 430 pages, in excellent condition, this also come with the number 2 version of the set as seen in the pictures. The second book has 836 p

 

Smaller antique English molding plane with a convex blade to produce a concave profile of about 1/4 inch width. There appears to be a maker's mark but I cannot make it out but may be "_rowell (perhaps

 

Japanese vintage striking chisel. The brand is NOMIMASA. The blade is laminated. The blade has been sharpened by #1000 water sharpening stone and wiped with camellia oil. The blade width is 6mm and th

 

Power Steering Pump Pulley Remove & Install Set (PSPKIT) Designed to prevent damage to pump or internal parts. The right combination of tools needed to remove and install a wide range of pulleys o

 

Old brass skeleton keys on a ring. Largest is 8.5". Next largest is 6". Two are 5.5" and smallest is 3". Posted with eBay Mobile

 

Early antique saw vise weighing almost 6 pounds. About 9" length. Jaws 9 1/4" wide. VG condition except bench bolt is broken. Diameter of bolt is approx 7 centimeters. Could be replaced or repaired. A

 

This is a great vintage estate clean out find. Miniature leather zippered Tool Kit with gold and white antique car and script on front. Complete set includes screw driver with handle marked Empire Mad

 

Mrsdeadhorse Store Here we have a very nice classic s. j. Addis bent gouge carving chisel with an outside grind shallow sweep edge that is 7/16 inch across. These English made chisels are considered b