This is a vintage combination screwdriver that can mount on your keychain or watch fob, showing a Marlin rifle on one side (likely a 336) with the date underneath. A cowboy on horse holding a rifle sh

 

We're selling this fine old boxwood caliper rule made by Lufkin. This is the model #171 , a 6 inch - 2 fold caliper rule. The rule has the inch scale [ 1-8'' and 1/16'' ] Marked on the rule is -- No.

 

FINE PAIR OF SIDE ROUND MOULDING PLANES BY GRIFFITHS, NORWICH 9 3/8" in length. A virtually identical made-up pair; the toes with different stamps of GRIFFITHS, NORWICH. A left and right-handed pair t

 

Ulmia dovetail plane with single iron. Very little use and well maintained.Length of plane body240 mmWidth of plane body56 mmCutting angle45°Width of plane iron33 mmLength of plane iron200 mmPlane ir

 

Up for bid lighty used set of Matco metric 7 to 19mm 3/8 drive 6pt shallow impact sockets.box inc. Posted with the eBay Android app

 

This 30's vintage Blue Point Boxocket #2022 Box End Combination 5/8" X 11/16" Wrench measures 10 1/4" long. It is stamped: 5/8 BLUE POINT XD BOXOCKET 2022 11/16 on one side of the round shank and PAT.

 

Here we have another Keen Kutter Plane, a KK 5 C with a corrugated bottom. This is one of the most common of the bench planes offered by the E. C. Simmons Co from 1906 thru 1912. The plane is 14" long

 

(PS..You get a case of 6 Vintage Master No. 1 Padlocks All Keyed Alike - Old Stock (New In Box) in this auction. (There is some minor staining here and there on these locks from sitting around for so

 

NICE 1/2" CHAMPION Bottom Fuller Hardy.. Here is a nice barely used bottom fuller that is work ready.. The fullering radius is clean with no wear, measures 2 1/2" wide with a 1/2" radius.. The hardy s

 

Set of 3 Robert Sorby Registered Mortice Chisels - 1/2 in, 3/4 in, and 1 in. All show some wear from normal use by a (now retired) woodworker.