This is a vintage ESCO grub hoe head in good sound condition with normal wear for age. It is 10 1/8" end to end and 5 3/4" at bit. It weighs 3 lbs 6.9 ozs and is free of handle. Please refer to close

 

This auction is for a used set of 12 needle files Glardon Vallorbe Switzerland used for jewelers and machinist, gunsmith and hobby work, fine tool. Good condition but two of the files has the tips bro

 

Millers Falls #22 woodworking plane in very good condition. No breaks, cracks, or repairs. 22 inches long X 2 7/8 inches wide. Solid nut adjuster. Back edge of plane has some yellow paint. Please look

 

Japanese vintage axe head. The axe is made from high carbon steel and laminated blade. The blade has been sharpened with #800 water stone. The cutting edge is 114mm. The width is 130mm. The weight is

 

THIS IS A LARGE LOT OF GOOD QUALITY COUNTERSINK BITS IN GOOD CONDITION. THERE ARE SEVERAL DIFFERENT SIZES ARE 3 MARKED JAPAN WHILE THE OTHERS ARE UNMARKED. GOOD QUALITY TOOLS IN GOOD CONDITION THAT WO

 

There is a little bit of everything in here. Some are keyed some aren't. Almost all of them are pinned except maybe one and the plugs. Mostly Schlage C keyway, but there is a Sargent LA, Weiser kit, K

 

You are looking at a very old vintage Miter saw blade.. it is approx 24 inches and very sharp... The Medallion on the handle has an eagle and says Warrented Superior.. very slight hairline splitting w

 

Used Vintage BINKS No 85 Air pressure adjustment guage. Tire paint tank regulator. Stamped : Binks No 85 200 binks MFG CO. 0 - 150. Lbs/in 2 Kg/cm 2. Untested sold as is for parts, Restoration, Refurb

 

I moved to the city and had to give up my workshop. This Bridge City Angle Divider is very lightly used and in excellent condition. Angle dividers are invaluable in determining the angles for perfect,

 

i000000 Vintage Small 4" Adjustable Wrench King Dick vgc Old Tool Click Images to Enlarge Italian bidders please note that we only ship to Italy using Signed For Service unless at your own risk, pleas