For bid is the Old Millers Falls 430 Hand Drill pictured. It works fine, turning and ratcheting left & right. The tool does have some wear from use and storage. Pat. Applied for. U.S.A. MADE. PATE

 

Template ICNPNK2 01 KIWA - KANNA. VTG. Japanese WOOD BLOCK PLANE carpenter's tools NR Description Please see a picture.  This plane is a tool which can perform fine work. Fixed width can be adjusted.

 

Good shape with no cracks or breaks. A little surface rust in some spots. Cutters are correct and present. No damage to the cutter hold downs or any place else on the plane. Marked STANLEY and MADE IN

 

VINTAGE ARMSTRONG A-1731-A 3/4"-7/8" OPEN END WRENCH IN GOOD CONDITION U.S.A. DescriptionCondition: used; this wrench is in good condition. This wrench has some scratches, from normal usage, additiona

 

A SET "RECORD" CRAMP HEADS 130s (made in england) HAVE BEEN STORED IN MY DAD'S SHED FOR DONKEY'S YEARS (20 yrs minimum) THIS A ONE OF A TWO SETS WE FOUND THE ORIGINAL PACKGING FELL APART THERE IS SOME

 

OLD axe head, MARKED 2 , C HAMMOND PHILA CAST STEEL, RUST AND PITTIND TO ONE SIDE , EDGE WILL NEED SHARPENING

 

Champion Tooth Crosscut Logging Saw. No Handles. 5 FT. Saw Blade Only. Lot #2 The saw measures 60” in length. Blade condition, pitting rust, will need to be sharpened. A good saw to add to your coll

 

Snap-On Wrenches, 7 total: 6 Combination OEX series sizes 17mm, 15mm, 11mm, 10mm, 9mm, 5/8" 1 Flare / open end RSX series 1/2" I was told these series were made from 1967 to 1987, please research if y

 

A nice Stanley 13.5 folding rule in excellent condition. Has not been cleaned in any way. As found. Condition looks to be quite nice with no excessive wear or damage.

 

Mrsdeadhorse Store Here we have a real find and that would be a Large [ measures just over 1 ft overall] SCREW PLATE that was found in a set of old antique Gunsmith tools that I bought some years ago.