VINTAGE MISC. B & D HOLE SAWS & MANDRELS. (26)SAWS & (6)MANDRELS. ALL IN VERY GOOD CONDITION. MANY APPEAR UNUSED. MANDRELS IN VERY GOOD CONDITION. NO PREVIOUS OWNER MARKS.

 

This is a nice old tool in good condition. My picture is fuzzy, but label is readable. If you have any questions please ask. Ship to lower 48 states only. Thanks Keith

 

Offered Is A 10 Inch "Stanely" Brace From Stanley Works U.S.A.In Good Working Condition Along Seven (7) Bits With One For Steel Five (5) For Wood Including One Boring Bit, And One Chanfer Bit For Wood

 

>>True Antique Tool>> One 3/8" ATHA BOTTOM SWAGE. LAST ONE! NEVER BEEN USED! THE SHANK IS 1 1/16" WIDE. IF NEEDED, YOU CAN ALWAYS GRIND SOME OFF! **The shank end was sheared off uneven, no

 

Up for auction is this vintage H. Disston handsaw. This has the eagle medallion and split nuts. There is a slight wave to the blade. This measures approximately 29" x 4 1/2" and has about 8 TPI. This

 

Nice original Proto soft face hammer with the original handle. The hammer is about 12 inches long. The head with the tips measures about 3 1/2 inches wide. The chrome is nice. Still has nice green pai

 

DIAMOND SCREW PLATE – SET NO. PC *Cutting 4-36, 6-32, 8-32, 10-24, 10-32, 12-24, ¼ x 20, 5/16 x 18 *S.W. Card Mfg. Co. Mansfield, Massachusetts. USA *Appears to be in excellent condition *I know no

 

fcc4568 Store 4 X WORKABLE PADLOCKS WITH KEYS LOT BUY OF TOOL COLLECTIBLES LOCKS SIZE OF LARGE LOCK 2.3/4 X 1.3/4 INCH OR 7 X 4.5 CM WHERE PRACTICAL,WE ALWAYS COMBINE SHIPPING/POSTAGE TO HELP YOU REDU

 

ANTIQUE CAST IRON AND WOOD BLOCK & TACKLEGOOD CONDITION, NO CRACKS IN THE CAST IRON, MINOR CRACKS IN THE WOOD SHEAVE STILL GOOD AND SOLIDMARKED 786OVERALL SIZE 11" LONG X 6-1/4" WIDE X 4" THICKWOO

 

Older Snap-on BF-618 auto body hammer. 10-1/2" long, 5" long head, weighs about 13 ounces with the handle. Nice shape, handle is solid & tight, faces show use & some minor dings but nothing de