This wrench is rusty and dirty. I can't quite read the embossed letter and numbers. It is 12 1/2" long. I have no clue what this is made for. Sold as is, no returns. Thanks and please check out my oth

 

Wedge shape and flat chamfers suggest a date of around 1800, give or take 10 years. There is the name stamp I Harrison in capital ZB. Could this be Jonathon Harrison of Newcastle Upon Tyne? Good condi

 

i000000 Vintage Brass Wheel Type Glass Cutter FRENCH WW Logo Old Tool Click Images to Enlarge You are bidding on a very nice example of a Vintage Brass Wheel Type Glass Cutter FRENCH WW Logo in good c

 

Lightly used and very well cared for, it retains a large portion of the factory finish, including most of the bluing on the blade. Study the photos carefully and feel free to ask any questions you may

 

Stanley No 5 jack plane, excellent cond This is a good Stanley Jack plane.Both beech handles are in good clean condition.14" long and 2 1/2" wide.Blade is full length, reground and honed. We use inter

 

All four of the block planes are used. There is 1 Stanley #120, 2 Stanley 110, and one unknown. The unknown one is missing the front knob. It looks like a Stanley bit I can't tell. The all need to be

 

Hi!Thanks for looking! All of the things i have for sale are as found and need cleaned. the bigger one is about 8 1/2" long and opens to 1 1/4".The smaller one is about 7 1/2" long and opens to 1".The

 

Bob is marked K&E CO. N. Y. see photo three. This is a working bob with three types of metal. The very top is brass the top middle section looks like copper. The bottom middle is brass and the ver

 

frickster Store Vint. WILTON 300 Series Bullet Machinist Bench Vise Swivel Base For Parts Only

 

FOR WATER PUMP NUTS ONLY IN RAISED LETTERS.UNUSUAL SHAPE.ABOUT 13" LONG.WOULD HOLD A 3" NUT.HEAVY DUTY.NO RUST.GOOD CONDITION.I WAS TOLD TODAY THIS IS A CATERPILLAR HEAVY EQUIPMENT WRENCH.