Up for sale are two used, well cared for, scarce and rare matched set of 5/16” tongue and groove woodworking planes made by H. Wilson in Newcastle England. These planes were made in the 1800's, they

 

THIS IS A STANLEY NUMBER 3 WITH CORRAGATED BOTTOM (3--C). THE PLANE IS ALMOST UNUSED; IT COMES WITH THE BOX, WHICH IS VERY POOR. THERE ARE SPECKS OF PAINT ON HANDLES AND SIDES. 95% PLUS ORIGINAL JAPAN

 

you are bidding on 22 new sliding door locks made by different manufactures but siliar to comp x NAC8042

 

14" Steel backed Tenon saw by Tyzack Sons & Turner, VGC This 14" Tenon saw was made by William Tyzack Sons and Turner of Sheffield.The blade is clean and straight, some very light pitting.The hand

 

Vintage hand drill including 4 bits, no visible maker marks, approximately 11" long, good condition, storage in handle, aluminum crank knob seems to be added, please use pictures as part of the descri

 

<div style="text-align:center"&am

 

Vintage Plow Plane Marked - C. Hardwood

 

Listed here is this Snap on , torqometer 1.5 inch pounds 1/4 drive TQSS012 a nice torque tool 24 oz. This is a good working tool. The lense is missing and will need replaced.

 

LARGE LOT OF (100) PLUS SCREWDRIVERS, DRIVERS, BITS - Flat Head, Phillips & More The Drivers range in size from 2" thru 13". There are Flat Head, Phillips, Awls, Bits and More. Makers Include: oth

 

For sale an exceptional set of tools - Very rare to find polished embossing tools as shown - Straight from the tool chest of a former silversmith & engraver - Tip sizes are - 1/2, 3/8. and 5/16 in