Three tool bits for a Stanley model 130-A spiral ratchet screwdriver, and other similar tools by Stanley, Millers Falls, etc. The important point to know if these will fit your tool is the shank diame

 

budgie2cheap Store An old 10 tpi saw by Disston,Philadelphia.good teeth,quite sharp,would benefit from a final honing.all nuts present,some splashes of paint on handle,but solid with no breaks.straigh

 

Please see photos. 1950's era Craftsman table saw model 113.27520. Email with any questions. Pick up only and within 72 hours of winning bid or purchase. 

 

up for auction is a Bluegrass 20 oz hammer that is 15" long, and two Bluegrass phillips screwdrivers marked 7PB-1 and 7PB-2. These are vintage tools and show the wear you would expect from used tools

 

Here we have a Vintage Craftsman Upholstery Furniture Cobbler Tack Hammer Wood Tool unused but very good condition. Magnetic tip. Measures 11 1/2" long and head is 5 1/2" Posted with eBay Mobile

 

OLD WOOD CARVING TOOLS STANLEY 1¼" BEVEL EDGE CHISEL TOOL IS IN FAIR FUNCTIONAL CONDITION COSMETICALLY CHALLENGED DUE TO WEAR VISIBLE IN HANDLE = LARGE CHIP AND SPLITS GRADE AND CONDITION IS OTHERWIS

 

Lot of 5 very old planes consists of: 1. 9 1/4" Taylor Liverpool molding plane, 1 1/4" wide. Iron is rust coated. 2. 9 1/4" F. Robinson with skewed iron that is rust coated. 1 1/8" wide. 3. An unmarke

 

Vintage Block and Tackle Barn Pulley. Posted with eBay Mobile

 

Vintage / antique chisel. No DOG here!!! How can you go wrong! My overall on this: Nice, especially for the age and scarcity of this one. This is in the 'Highly Collectible Catagory'. This will requir

 

This is a Millers Falls No.42 coping saw that is in fair shape. It is missing most of the nickel plating. The mechanism is sound and in good shape. The ferrule on the handle has a crack in it. The MF